I-87026PW-G
Introduction
The 87026PW is a multifunction module that includes 6 analog input channels, 2 analog output channels, 2 digital input channels, 2 digital output channels. It provides a programmable input range on all analog input (+/-150 mV, +/-500 mV, +/-1 V, +/-5 V, +/-10 V, +/-20 mA, 0 ~ 20 mA or 4 ~ 20 mA), analog outputs are 16 bit at +/-5 V, +/-10 V, 0 ~ 20 mA or 4 ~ 20 mA and all digital outputs can be set as alarm output. Each analog input can be configured for an individual range and provides a high overvoltage protection of 240 Vrms. Voltage and current inputs/outputs are jumper selectable.
Applications
• Industrial Automation
• Industrial Machinery
• Building Automation
• Food and Beverage Systems
• Semiconductor Fabrication
• Control Systems
Ordering Information
PRODUCT SERIES | DESCRIPTION | QNT. | INQUIRY |
---|---|---|---|
This combination include other products.
Similar Products
CPU Module | |
---|---|
Watchdog Timer | Yes, Module (1.6 Seconds), Communication (Programmable) |
Isolation | |
---|---|
Intra-module Isolation | 2500 VDC |
EMS Protection | |
---|---|
ESD (IEC 61000-4-2) | ± 4 kV Contact for Each Terminal ±8 kV Air for Random Point |
LED Indicators | |
---|---|
Status | 1 x Power and Communication 16 x I/O |
Analog Input | |
---|---|
Channels | 6 (Differential) |
Type | Voltage Current |
Range | +/-150mV, +/-500 mV, +/-1V, +/-5 V, +/-10 V +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA (Jumper Selectable) |
Resolution | 16-bit |
Accuracy | Normal Mode: ±0.1% of FSR Fast Mode: ±0.5% or better |
Sampling Rate | Normal Mode: 10 Samples/Sec. Fast Mode: 60 Samples/Sec. (Total) |
Bandwidth | Normal Mode: 15.7 Hz Fast Mode: 78.7 Hz |
Input Impedance | Voltage: 2 MΩ Current: 125 Ω |
Common Mode Rejection | 86 dB Min. |
Normal Mode Rejection | 100 dB |
Overvoltage Protection | 240 Vrms |
Individual Channel Configuration | Yes |
Zero Drift | ±20 μV/°C |
Span Drift | ±25 ppm/°C |
Analog Output | |
---|---|
Channels | 2 |
Type | Voltage Current |
Range | +0 V ~ +5 V, +/-5 V, +0 V ~ +10 V, +/-10 V,+0 mA ~ +20 mA, +4 mA ~ +20 mA (Jumper Selectable) |
Resolution | 12-bit |
Accuracy | ±0.1% of FSR |
Open Wire Detection | Yes, +4 ~ +20 mA |
Current Load Resistance | 500 Ω |
Power-on Value | Yes |
Safe Value | Yes |
Digital Input/Counter | |
---|---|
Channels | 2 |
Type | Wet contact |
Sink/Source (NPN/PNP) | Sink |
ON Voltage Level | +3.5 VDC ~ 50 VDC |
OFF Voltage Level | +1 VDC Max. |
Max. Counts | 32-bit |
Frequency | 100 Hz |
Min. Pulse Width | 5 ms |
Input Impedance | 10 KΩ, 0.66W |
Overvoltage Protection | 70 VDC |
Digital Output | |
---|---|
Channels | 2 |
Type | Isolated Open Collector (Sink) |
Load Voltage | +3.5 VDC ~ +50 VDC |
Load Current | 700 mA/channel Max. |
Overvoltage Protection | 60 VDC |
Overload Protection | Yes |
Short-circuit Protection | Yes |
Power on Value | Yes, Programmable |
Safe Value | Yes, Programmable |
COM Ports | |
---|---|
Ports | 1 x RS-485 |
Baud Rate | 1200 ~ 115200 bps |
Data Format | N, 8, 1 |
Protocol | DCON |
Power | |
---|---|
Consumption | 1.8 W Max. |
Mechanical | |
---|---|
Dimensions (mm) | 30 x 102 x 115 (W x L x H) |
Environment | |
---|---|
Operating Temperature | -25 ~ +75 °C |
Storage Temperature | -30 ~ +80 °C |
Humidity | 5 ~ 95% RH, Non-condensing |