I-8172W

2-port FRnet Module

Features

• Reduced Wiring two-wire cabling
• Innovative token-stream communication technology
• Real-time I/O synchronization capabilities
• Fixed cyclic scan time for deterministic control
• High speed distributed I/O control capabilities
• Memory-mapping I/O programming
• Easily programmable
• No software overhead for protocol processing

Introduction

The ICP DAS XP-8000, WP-8000, LP-8000, I-8000 and iP-8000 series modules are all Programmable Automation Controller (PAC) that use an I-8172W FRnet communication module to implement an FRnet network.
The I-8172W is an isolated FRnet communication controlers. The I-8172W has two FRnet ports, each FRnet port can control a maximum of 16 communication nodes, numbered from 0 to 15. Each single node of the remote I/O module can control a maximum of 16 DI/DO channels. In other words, each FRnet port can control a maximum of 128 DI and 128 DO channels.

Applications

• Industrial Automation
• Remote I/O control
• Building Automation
• Parking Lot Management

Ordering Information

Available soon

Will be phased out

Phased out

PRODUCT SERIES	DESCRIPTION	QNT.	INQUIRY
PRODUCT SERIES I-8172W	DESCRIPTION2-port FRnet Module

This combination include other products.

Similar Products

Available soon

Will be phased out

Phased out

Isolation
Intra-module Isolation	1500 VAC

LED Indicators
Status	1 x Power 2 x Communication

FRnet
Ports	2
Wire Cable	Belden 8941 (2P twisted-pair cable), When different cables are used, the transmission distance may change
Transfer Distance	Max. 400 m for speed 250 Kbps (Default); Max. 100 m for speed 1 Mbps
Cyclic Time	2.88 ms for speed 250 Kbps (Default) 0.72 ms for speed 1 Mbps
Connection	Removable 5-Pin Terminal Block

Power
Consumption	0.12A @ 5V = 6W ,+/- 5% For Hardware version 1.2

Mechanical
Dimensions (mm)	32 x 90 x 115 (W x L x H)

Environment
Operating Temperature	-25 ~ +75 °C
Storage Temperature	-40 ~ +85 °C
Humidity	5 ~ 95% RH, Non-condensing