I-7520A

Isolated RS-232 to RS-422/485 Converter
I-7520A
I-7520A
I-7520A
I-7520A
I-7520A
I-7520A

Features

  • Automatic RS-485 Direction Control
  • ESD Protection for the RS-232/422/485 Data Line
  • 3000 VDC Isolation Protection on the RS-232 side
  • Transmission Speed of up to 115200 bps
CE UKCA FCC RoHS WEEE

Introduction

Most industrial computer systems provide standard RS-232 serial ports. Though widely accepted, RS-232 has limited transmission speed, range, and networking capabilities. The RS-485 standards overcome these limitations by using differential voltage lines for data and control signals, which transparently converts RS-232 signals into isolated RS-485 signal with no need to change any hardware or software. The I-7520 lets you easily build an industrial grade, long-distance communication system using standard PC hardware.

The design of the isolation between the I-7520/A and the I-7520R/AR is different. If the user wants to supply power from the PLC/PC, the I-7520R/AR should be used, otherwise the isolation will be broken. Refer to User’s Manual .  

Applications


Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES I-7520A     CR DESCRIPTIONIsolated RS-232 to RS-422/485 Converter (Blue Cover) (RoHS)
This combination include other products.

Similar Products

Isolation
Intra-module Isolation 3000 VDC on RS-232 side
EMS Protection
ESD (IEC 61000-4-2) Yes
LED Indicators
Status 1 x Power and Communication
COM Ports
Ports 1 x RS-232 Input (Master)
1 x RS-422/485 Output (Slave)
Baud Rate 300 ~ 115200 bps
Power
Input Range +10 VDC ~ +30 VDC (Non-isolated)
Consumption 1.2 W
Mechanical
Casing Plastic
Dimensions (mm) 72 x 35 x 118 (W x L x H)
Installation DIN-Rail Mounting
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +75 °C
Humidity 10 ~ 90% RH, Non-condensing