CAN-2057C

CANopen Slave Module of 16-channel Isolated (Sink, NPN) DO
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C
CAN-2057C

Features

  • NMT Slave
  • Providing I/O Pair-connection Function
  • Provide default EDS file
  • Passed the validation of CiA CANopen Conformance Test tool
  • Support Polarity Output Setting and Save
  • Support Error Value Output Setting and Save
  • Support Dynamic PDO
  • Support Application: Drive Relay, Resistance Load
  • ESD Protection 4 kV Contact for each channel 
CE FCC RoHS WEEE

Introduction

CAN-2057C module follows the DS-301 version 4.02 and DSP-401 version 2.1. You can access the digital input status and set the configuration by using standard CANopen protocol. CAN-2057C has passed the validation of the CiA CANopen Conformance Test tool. Therefore, you can use it with standard CANopen master easily by applying the EDS file. CAN-2057C has 16-channel isolated open-collector output. It can be used to various applications, such as drive relay, light control, resistance load and so forth. By owing to the CANopen masters of ICP DAS, you can quickly build a CANopen network to approach your requirements. 

Applications

  • Alarm detector
  • Switch detection
  • I/O pair-connection

Ordering Information

PRODUCT SERIES DESCRIPTION QNT. INQUIRY
PRODUCT SERIES CAN-2057C     CR DESCRIPTIONCANopen Slave Module of 16-channel Isolated (Sink, NPN) DO (RoHS)
This combination include other products.

Similar Products

CPU Module
Watchdog Timer Hardware watchdog
LED Indicators
Status 3 LEDs to PWR, RUN and ERR
Digital Output
Channels 16 (Sink)
Type Open-collector
Load Voltage +5 ~ +30 VDC
Load Current 100 mA per channel
Intra-module Isolation 3750 Vrms
CANopen
Baud Rate 10 k ~ 1 M
Isolation 3000 VDC for DC-to-DC, 2500 Vrms for photo-couple
Terminal Resistor Built-in 120Ω
Protocol CiA 301 v4.02, CiA 401 v2.1
Node ID 1 ~ 99
No. of PDOs 10 RxPDO , 10 TxPDO
PDO Mode Event Triggered, Remotely requested, Cyclic and acyclic SYNC
Error Control Node Guarding protocol / Heartbeat Producer
NMT Slave
EMCY Message Yes
Power
Consumption 1.5 W
Mechanical
Dimensions (mm) 33 x 99 x 78 ( W x L x H )
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +80 °C
Humidity 10 ~ 90% RH, Non-condensing