PET-7065 – Ethernet I/O Module with 6-channel Digital Input and 6-channel PhotoMOS Relay Output
New Products
2021-08-11
Introduction:
The PET-7065 provides 6 wet contact Digital Input channels and 6 PhotoMOS Relay channels. Each digital input channel can be used as a 32-bit counter. The PET-7065 can be remotely controlled by using the Modbus TCP/UDP protocol via an Ethernet network. This makes the PET-7065 to be well integrated with HMI, SCADA, PLC and other industrial control software systems.The PET-7065 supports IEEE 802.3af Power-Over-Ethernet (Class 1) specifications. By connecting to network devices that support the IEEE 802.3af PoE standard, power can be supplied via the network cable.
Features:
- Embedded web server for easy configuration and commissioning by using a web browser
- Communication Security
- Support for both Modbus TCP and Modbus UDP Protocols
- Built-in I/O
- Digital Input/Counter: 6 Channels
- PhotoMOS Relay: 6 Channels
- I/O Pair Connection
- Dual Watchdog
- IEEE 802.3af-compliant Power over Ethernet (PoE)
Comparison of features between the PET-7065 and the ET-7065
PET-7065 | ET-7065 | |
---|---|---|
Communication | ||
Ethernet Port | 1 x RJ-45, 10/100M Base-Tx | |
Protocol | Modbus TCP and Modbus UDP | |
Power | ||
Reverse Polarity Protection | Yes | |
Powered from Terminal Block | +12 ~ +48 VDC | +10 ~ +30 VDC |
Power Over Ethernet | Yes | - |
PhotoMOS Relay | ||
Channels | 6 | |
Type | PhotoMOS Relay, Form A | |
Digital Input/Counter | ||
Channels | 6 | |
Sink/Source (NPN/PNP) | Sink/Source | |
Type | Wet Contact |
For more information, please refer to the product websites: https://www.icpdas.com/en/product/PET-7065
For more relative products information, please visit the Selection Guide website.