EOL notification date: 2017/04/26
Phased out model: TPD-283U
Last Order Date: 2017/08/31

Dear Partners,

ICP DAS hereby formally announces the manufacturing discontinue and End of Life (EOL) of TPD-283U.

Within the effective warranty period, ICP DAS is committed to continue providing comprehensive after-sales service and technical support.
● Reason for termination: Phase out of MCU
● Suggested replacement device: TPD-283U-H
- Status: Available
- Please refer to the following table for cross reference information.

Model Name	TPD-283U	TPD-283U-H
Product Status	Phased out	Available
CPU	32-bit RISC CPU	32-bit RISC CPU
Memory Expansion	16 MB SDRAM/8 MB Flash	16 MB SDRAM/16 MB Flash
Real Time Clock (RTC)	Yes	Yes
Buzzer	Yes	Yes
Rotary Switch (0~9)	Yes	Yes
LCD	2.8 TFT (Resolution 240 x 320 x 16)	2.8 TFT (Resolution 240 x 320 x 16)
Serial Port	RS-485 (including Self-Tuner)	RS-485 (including Self-Tuner)
Firmware updates	USB 1.1 Client	USB 1.1 Client or Ethernet
Ethernet	RJ-45 x 1, 10/100 Base-TX	RJ-45 x 1, 10/100 Base-TX
Powered from PoE	IEEE 802.3af, Class1 (48 V)	IEEE 802.3af, Class1 (48 V)
Reset Button	Yes	Yes

Migrate projects from TPD-283U to TPD-283U-H:
1. Open original project by using HMIWorks v2.10.11 or last version.
2. Click the HMIWorks menu item "HMI/Project Configuration".


3. Click the "General" page.
4. Change the "TouchPAD Type" to TPD-283U-H.

5. Click "OK" button.
6. Click the HMIWorks menu item "Run(Build & Download)/Build & Render" to rebuild project or press F5.



For more information, please visit the link below: https://www.icpdas.com/en/product/TPD-283U-H