(P)ET-7200_V2 (above)
WARNING
When you need to set up multiple modules, you can export the configuration file after setting up the first module, and then quickly import it to other modules, which greatly reduces the setup time.
.png)
Update the firmware based on the hardware version of the (P)ET-7200 series module. For example, DO NOT install V2 or V4 firmware on V1 modules; otherwise, the module will need to be returned to the factory for repair.
| Firmware Version | V4 Module | V2 Module | V1 Module |
|---|---|---|---|
| (P)ET-7200_V4 |  |
X | X |
| (P)ET-7200_V2 | X | |
X |
| (P)ET-7200_V1 | X | X | |
Starting with FW V3.11, users can import and export system configuration files.
When you need to set up multiple modules, you can export the configuration file after setting up the first module, and then quickly import it to other modules, which greatly reduces the setup time.
Note: Items marked with "Y" indicate support for this function.
How to check the hardware version of your ET-7200/PET-7200?
Check the label on the ET-7200/PET-7200 module; the number next to the letter "V" indicates the hardware version. If no label is present, the hardware version defaults to V1.
Check the label on the ET-7200/PET-7200 module; the number next to the letter "V" indicates the hardware version. If no label is present, the hardware version defaults to V1.
