Pair Connection Settings
Modbus Port  
 I/O Pair connection
Remote IP Address Remote TCP Port
Connection Timeout ms Reconnect Interval ms
Remote Net ID Scan Time ms
Access Type  DO
Local DO Base Address Remote DI Base Address
I/O Count Communication Timeout  ms
Access Type  AO
Local AO Base Address Remote AI Base Address
I/O Count Communication Timeout  ms
I/O Pair Connection This item is used to enable/disable the I/O pair connection.
Remote IP Address The IP address of the remote input device.
Remote TCP Port The Modbus/TCP Port of the remote input device.
Connection Timeout The length of time that the ET-7X00/PET-7X00 should wait for a connection to the remote input device.
Reconnect Interval The reconnect interval is the amount of time between attempts by the ET-7X00/PET-7X00 to reconnect with the remote input device.
Remote Net ID The Modbus Net ID of the remote device.
Scan Time The frequency that the remote input device will be polled.
Local DO/AO Base Address The DO/AO base address of the local DO/AO register that will be mapped to the remote DI/AI device.
Remote DI/AI Base Address The DI/AI base address of the Remote DI/AI device that will be mapped to the local DO/AO register.
I/O Count The I/O count mapped from the base address.
Communication Timeout The period of time that the ET-7X00/PET-7X00 will wait for a response from the remote DI device.