/****************************************************/
/*   HDS revision history                           */
/****************************************************/

[ ***  v1.09.3 (2026/02/04)  ***]
1. Support "Expasnsion Byte" function.
2. Add the parameter number from 64 to 255 of the DevSpecCmd.


[ ***  v1.09 (2022/12/27)  ***]
1. Burst Command: Support CMD9, CMD33 and CMD48 (setting by using HART CMD108)
2. HDS.ini: Add the "Baud", "Parity", "DataBit", "StopBit" settings can be used to set the com port parameters. (useful for I-7570)
3. HDS.ini: Add the "BurstPeriod" setting can be used to set HART burst package sending period from HDS. (Close the com port of HDS can stop HART burst function)


[ ***  v1.08 (2022/05/27)  ***]
1. Improve the response time of HDS (decrease about 280ms)
2. Add "SendCnt" field in "DataLog" screen.
3. Solve HDS crash when the polling address of master tool is between 16~63.
    
    
[ ***  v1.07 (2020/03/20)  ***]
1. Supports HART cmd09, 14, 20~22, 33, 43, 44, 47, 76, 89, 90, 95
    
    
[ ***  v1.06 (2019/02/01)  ***]
1. Supports HART cmd08.
2. Support HART v7 Protocol
   [1] Add "MfrID(v7)" and "HART_v7.0" field


[ ***  v1.05.1 (2018/05/24)  ***]
1. Supports HART cmd48.
2. Supports Device-Specific commands (128 to 253).
   
        
[ ***  v1.04 (2017/03/09)  ***]
1. Improve the communication efficiency when using HDS with I-7547. (Checking the I-7547_FW to be v1.04)


[ ***  v1.03 (2016/11/10)  ***]
1. Add the HART channel change function for I-7547 module.


[ ***  v1.02 (2016/07/22)  ***]
1. Add the "HT_DEVSTA" screen. => Used to set the HART Device Status.


[ ***  v1.01 (2016/05/05)  ***]
1. Solve "EditBox" bug. => when click "Enter" button in the "EditBox", it will close the program.