Command | Description |
---|---|
$AASiARRFF | Set One Channel Configuration |
$AASiB | Read One Channel Configuration |
#AASi | Read All Channel Data |
#AASiCj | Read One Channel Data |
$AASiCj7 | Read One Channel Overflow Value |
$AASiCj5s | Set Channel Counter Start / Stop Status |
$AASiCj5 | Read Channel Counter Start / Stop Status |
$AASiCj6 | Clear Counter |
Command | Description |
---|---|
$AASiI | Read Input Signal Mode |
$AASiIs | Set Input Signal Mode |
$AASiTRh | Read Non-isolated High/Low Trigger Level |
$AASiTRh(data) | Set Non-isolated High/Low Trigger Level |
Command | Description |
---|---|
@AASiDI | Read Digital Output Status and Alarm Status |
@AASiDO(Data) | Set Digital Output |
$AASiTRh | Read Non-isolated High/Low Trigger Level |
$AASiTRh(data) | Set Non-isolated High/Low Trigger Level |
$AASiWh | Read Min. Input Width at High/Low Level |
$AASiWh(data) | Set Min. Input Width at High/Low Level |
$AASiCjM | Read Max. Counter Value |
$AASiCjM(data) | Set Max. Counter Value |
@AASiCjP | Read Preset Count Value |
@AASiCjP(data) | Set Preset Count Value |
$AASi4 | Read Digital Filter Enabled/Disabled Status |
$AASi4s | Enabled/Disabled Digital Filter |
$AASiG | Read Gate Mode |
$AASiGs | Set Gate Mode |
Command | Description |
---|---|
~AASiAs | Set Alarm Mode |
~AASiA | Read Alarm Mode |
@AASiCA | Clear Latch Alarm |
@AASiDA | Disable Alarm |
@AASiDO(Data) | Set Digital Output |
@AASiDI | Read Digital Output Status and Alarm Status |
@AASiEAt | Set Alarm Enable Type |
@AASiRA0(Data) | Set Alarm Value 0 |
@AASiRA1(Data) | Set Alarm Value 1 |
@AASiRA0 | Read Alarm Value 0 |
@AASiRA1 | Read Alarm Value 1 |