這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player

home > product> solutions > remote i/o modules/units > M-2000 > M-2017
 
M-2017
8-channel Analog Input Module
       
 
~ NEW ~    
  • 8-channel Differential Analog Input
  • DIP Switch Selectable Voltage or Current Input
  • 240 Vrms Overvoltage Protection
  • Supports Fast and Normal Mode Sampling
  • 4 kV ESD and EFT Protection
  • Overcurrent Protection
  • Individual Channel Configuration
  • Dual Watchdog
  • 3000 VDC Intra-Module Isolation, Field to Logic
  • Wide Operating Temperature Range: -25°C to 75°C
   
Model: M-2017    
 
The M-2017 is an Analog Input module that includes 8 differential Analog Input channels. The module provides a programmable input range on all Analog Input channels, and each channel can be configured for an individual input range, providing a high overvoltage protection of 240 Vrms and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current input is DIP switch selectable. The sampling rate for the M-2017 module is adjustable and can be set to either fast or normal mode. The module also features per-channel open wire detection for current input of 4 to 20 mA, and provides 8 kV ESD protection, 4 kV EFT protection, 2 kV surge protection, and 3000 VDC intra-module isolation. The M-2017 module supports both the Modbus RTU and DCON protocols, which can be configured via software.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Analog Input
Input Channels 8 Differential
Input Range Voltage ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
Current ±20 mA, 0 ~ 20 mA, 4 ~ 20 mA (DIP switch selectable)
Resolution 16-bit
Sampling Rate Normal Mode: 10 Samples/Sec. (Total)
Fast Mode: 60 Samples/Sec. (Total)
Accuracy Normal Mode: ±0.1% of FSR
Fast Mode: ±0.5% of FSR
Common Voltage Protection +/-200 VDC
Overcurrent Protection Yes, 50 mA at 110 VDC
Input Impedance 1 MΩ
Over Voltage Protection 240 Vrms
Individual Channel Configuration Yes
Connection 20-Pin Removable Terminal Block
 
Communication Interface
Interface RS-485
Bias Resistor Yes, 1k Ω bias resistor by switch selectable
Format N81, N82, E81, O81
Baud Rate 1200 to 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicators -
7-Segment LED Display -
Isolation
Intra-module Isolated, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) 8 kV Contact for each terminal and 16 kV Air Random Point
EFT (IEC 61000-4-4) ±4 kV for Power
Surge (IEC 61000-4-5) ±2 kV for power liner
Power
Reverse Polarity Protection Yes
Input Voltage Range +10 ~ +48 VDC
Power Consumption 0.7 W Max
Mechanical
Dimensions (L x W x H) 110 x 33 x 96 mm
Installation DIN-Rail
Environment
Operating Temperature -25°C to +75°C
Storage Temperature -30°C to +80°C
Relative Humidity 10 ~ 95% RH, Non-condensing
 
M-2017 CR 8-channel Isolated Analog Input Module With High Voltage Protection (RoHS)
 
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player