home > product> solutions > remote i/o modules/units > Lighting Control

home > product> solutions > remote i/o modules/units > Lighting Control > LC-103H

LC-103H
1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module with High Power Relay Output

~ NEW ~

Provide High Power Relay Output to turn ON/OFF the Lighting
Support Lighting Module (Max.):
Incandescent Lamp: 40 W/ 220 VAC * 8 Sets
LED(Electronic ballast): 40 W/ 220 VAC * 10 Sets
Isolated AC Digital Input
Made from fire retardant materials (UL94-V0 Level)
5000 VDC Intra-Module Isolation
±2 kV Surge, ±4 kV ESD and EFT Protection
Supports Modbus RTU and DCON Protocols
Low power consumption
DIN-Rail mounting

Model: LC-103H

The LC-103H is an easy-to-use lighting control module that requires no specialist skills to install and operate, and no software is needed in order to control the DO channels.

The LC-103H provides 1 channel for digital input (photo couple isolation) and 3 channels for relay output. All output channels are form A type relays, while the input channel is based on a sink-type using a wire connection. The input channel can directly control a 3-channel relay ON and OFF sequence without requiring a remote host controller. 4 kV ESD protection and 5000 Vrms intra-module isolation are also provided.

When required, communication with the LC-103H is programmable based on the DCON & Modbus RTU protocol, and an added benefit is that different addresses can be set for DCON & Modbus RTU communication via hardware configuration.

Digital Input
Input Channels	1
Type	90 ~ 240 VAC
On Voltage Level	65 VAC
Off Voltage Level	56 VAC
Input Impedance	68 KΩ, 1 W
Isolation	5000 Vrms
Function	Local and Remote Direct Control Relay ON/OFF and Remote Status Monitoring
Relay Output
Output Channels	3
Type	Power Relay, Form A (SPST N.O.)
Operating Voltage	250 VAC or 30 VDC
Max. Load Current	16 A (Res. Load) (1).250 VAC (Recommend Working Current 1.5 A)
Operating Time	10 ms Max.
Release Time	5 ms Max.
Electrical Life (Resistive load)	120,000 ops.
Mechanical Life	5,000,000 ops.
Application Specification	(1).Incandescent Lamp: 40W/ 220VAC * 8 Sets (2).LED(Electronic ballast): 40W/ 220VAC *10 Sets
Safety Approval	UL/CUL, TUV
Power-on Value	-
Safe Value	-

Communication
Interface	RS-485
Format	N, 8, 1
Baud Rate	9600 bps
Protocol	Modbus RTU/DCON
Node Addresses	1 ~ 31
Connector	RJ-11
LED Display
Power	1 LED as Power Indicator
EMS Protection
ESD (IEC 61000-4-2)	±2 kV Contact for Each Terminal
ESD (IEC 61000-4-2)	±4 kV Air for Random Point
EFT (IEC 61000-4-4)	±2 kV for Power
EFT (IEC 61000-4-5)	±2 kV for Power
Power Requirements
Input Voltage Range	10 ~ 30 VDC
Consumption	0.5 W Max.
Connector	RJ-11
Mechanical
Dimensions (W x L x H)	72 mm x 100 mm x 59 mm
Installation	DIN-Rail
Environment
Operating Temperature	-25°C ~ +75°C
Storage Temperature	-30°C ~ +75°C
Humidity	10 ~ 95% RH, Non-condensing

LC-103H CR

1-channel AC Digital Input and 3-channel Relay Output Lighting Control Module with High Power Relay Output (RoHS)

tM-7520U CR	RS-232 to RS-485 converter (RoHS)
tM-7561 CR	USB to RS-485 converter (RoHS)
I-7514U CR	4-channel RS-485 Hub (RoHS)
TPD-280 CR	2.8” Touch HMI device with RS-485 (RoHS)

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。

這個頁面上的內容需要較新版本的 Adobe Flash Player。