home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > M-7084
 
M-7084
4/8-channel Counter/Frequency/Encoder Input Module
 
~ NEW ~
Model: M-7084
 
  • 8 Up Counter/Frequency Channels or 4 Encoder Input Channels
  • Programmable Digital Filter
  • 32-bit Counter
  • Individual Channel Configuration
  • Virtual Battery Backup to Preserve Counter Values
  • +/-4 kV ESD Protection
  • Preset Values for Counter Input
  • RoHS Compliant
  • Wide Operating Temperature Range: -25 ~ +75°C
 
The M-7084 is a 32-bit high-speed Counter/Frequency/Encoder input module that offers a variety of mode options, including "Up Counter”, "Frequency Input", "Up/Down Counter", "Direct/Pulse Counter" and "A/B Phase Counter" modes. The mode combinations can be individual set for all 8 channels, where some channels can be set to “Up Counter” mode and other channels can be simultaneously set to “Frequency”, "Up/ Down Counter" or “Encoder input” mode. The built-in digital filter can filter out noise where the high/ low pulse width is smaller than the minimum high/low width of the digital filter. The M-7084 provides a virtual battery backup function in counter mode.
 
Counter Measurement, Frequency Measurement and Encoder Motion Control.
 
Communication
Interface RS-485
Format N, 8, 1
Baud Rate 1200 ~ 115200 bps
Protocol Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator
Power 1 LED, Red
Isolation
Intra-module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) +/-4 kV Contact for Each Terminal
EFT (IEC 61000-4-4) +/-4 kV for Power
Surge (IEC 61000-4-5) +/-3 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.32 W Max.
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Humidity 10 ~ 90% RH, Non-condensing
 
Counter/Frequency/Encoder Input
Channels 4-channel Up/Down Counter (CW/CCW)
4-channel Dir/Pulse Counter (Bi-direction)
4-channel A/B Phase (Quadrature Counting)
8-channel Up Counter
8-channel Frequency
Contact Wet
Sink/Source (NPN/PNP) Sink
Types Counter, Frequency or Encoder
Counter/Encoder-bits 32-bit (4,294,967,295)
On Voltage Level +3.5 VDC ~ +30 VDC
Off Voltage Level +1 VDC Max.
Programmable Digital Filter 1 ~ 32767 μs
Individual Channel Configuration Yes
Counter Mode Up or Up/Down
Encoder Mode CW/CCW, Dir/Pulse, AB Phase
Frequency Mode Yes
Max. Speed 3.5 VDC ~ 10 VDC: 200 kHz
10 VDC ~ 30 VDC: 150 kHz
Frequency Accuracy 1 Hz~200 kHz = ±0.025% of Input Frequency (Note1)
200 kHz~1 MHz =±0.1% of Input Frequency
Virtual Battery Backup to preserve Counter Values Yes
 
Note1:
Frequency Range Frequency Error (typical)
1 Hz ~ 10 Hz 0.01 Hz
10 Hz ~ 10 KHz 0.5 Hz
10 KHz ~ 100 KHz 15 Hz
100 KHz ~ 200 KHz 30 Hz
 
M-7084-G CR 4/8-channel Counter/Frequency/Encoder Input Module (RoHS)
 
SG-770 CR 7-channel Differential or 14-channel Single-ended Surge Protector (RoHS)
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player