home > product> solutions > remote i/o modules/units > I-7000 & M-7000

home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7017Z/M-7017Z

I-7017Z/M-7017Z
10/20-channel Analog Input Module with High Voltage Protection



Model: I-7017Z	Model: M-7017Z

10-channel Differential or 20-channel Single-ended inputs
Jumper Selectable Voltage or Current Input
240 Vrms Overvoltage Protection
Supports Fast and Normal Mode Sampling
4 kV ESD and EFT Protection
3000 VDC Intra-module Isolation
Overcurrent Protection
Individual Channel Configuration
Dual Watchdog
Wide Operating Temperature Range: -25 to +75°C

The I-7017Z is an Analog Input module that includes 10 differential or 20 single-ended Analog Input channels. The module provides a programmable input range on all Analog Input channels. Each Analog Input channel can be configured for an individual input range, providing a high overvoltage protection of 240 Vrms and 50mA overcurrent protection at 110 VDC/VAC. Voltage and current input is jumper selectable. The sampling rate of the I-7017Z is adjustable can be set to either fast or normal mode. The module also features per-channel open wire detection for 4 ~ 20 mA input and provides 4 KV ESD protection as well as 3000 VDC intra-module isolation. The M-7017Z supports both the Modbus RTU and DCON protocols, which can be configured via software, and all hardware specifications are the same as the I-7017Z.

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Models		I-7017Z	M-7017Z
Analog Input
Channels		10/20
Wiring		10 Differential or 20 Single-ended (Software Selectable - see Note 1)
Sensor Types	Voltage	±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
	Current	±20 mA , 0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)
Resolution		16-bit
Accuracy	Normal Mode	±0.1% of FSR
	Fast Mode	±0.5% of FSR
Sampling Rate	Normal Mode	10 Hz
	Fast Mode	60 Hz
Input Impedance	Voltage	2 MΩ (Differential)
		1 MΩ (Single-ended)
	Current	125 Ω (Differential)
Common Voltage Protection		±200 VDC
Individual Channel Configuration		Yes
Overvoltage Protection		240 Vrms
Overcurrent Protection		Yes, 50 mA at 110 VDC
Temperature Output Consistency		Yes, 400 VDC
Open Wire Detection for +4 ~ +20 mA		Yes

Note 1: Differential wiring can be used for both voltage input and current input.
Single-ended wiring can only be used for voltage input

Models	I-7017Z	M-7017Z
Communication
Interface	RS-485
Bias Resistor	No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format	N, 8, 1
Baud Rate	1200 to 115200 bps
Protocol	DCON	Modbus RTU, DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator	Yes, 1 as Power/Communication Indicator
I/O LED Indicator	-
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	3000 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
EFT (IEC 61000-4-4)	±4 kV for Power Line
Surge (IEC 61000-4-5)	±0.5 kV for Power Line
Power
Reverse Polarity Protection	Yes
Input Range	+10 ~ +30 VDC
Consumption	2.0 W
Mechanical
Dimensions (L x W x H)	123 mm x 72 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 to +75°C
Storage Temperature	-40 to +85°C
Humidity	10 to 95% RH, Non-condensing

I-7017Z-G CR	10/20-channel Analog Input Module with High Voltage Protection using the DCON Protocol (Gray Cover) (RoHS)
M-7017Z-G CR	10/20-channel Analog Input Module with High Voltage Protection using the DCON and Modbus Protocols (Gray Cover) (RoHS)

tM-7520U CR	RS-232 to RS-485 converter (RoHS)
tM-7561 CR	USB to RS-485 converter (RoHS)
tM-SG4 CR	RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR	4-channel RS-485 Hub (RoHS)
SG-770 CR	7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series	Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。

這個頁面上的內容需要較新版本的 Adobe Flash Player。