home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7066(D)/M-7066P(D)
 
I-7066(D)/M-7066P(D)
7-channel PhotoMos Relay Output Module
 
  ~ NEW ~
Model: I-7066(D) Model: M-7066P(D)
 
  • I-7066(D)
    • PhotoMOS Relay:0.13 A @ 350 V (AC peck or DC)
  • M-7066P(D)
    • PhotoMOS Relay:1 A @ 80 V (AC peck or DC)
  • 7 PhotoMOS Relay Outputs
  • 4 kV ESD Protection
  • No Arcing, No Bounce, and No Switching Noise
  • Photocouple Isolation
  • Built-in Dual Watchdog
  • Configurable Power-on Value Settings
  • Configurable Safe Value Settings
  • Wide Operating Temperature Range: -25 ~ +75°C
 
Both the I-7066 and the M-7066P feature seven Form A PhotoMOS relay output channels. In comparison to electromechanical relays, the PhotoMOS relays provide a faster response time, greater electrical endurance, higher vibration and shock resistance. There are also no arcing, no bounce, and no switching noise for the PhotoMOS relay. There are options for configuring power-on and safe digital output values, and both the I-7066D and the M-7066PD each include seven LED indicators that are used to display channel status as well as providing 4 kV ESD protection.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Models I-7066 I-7066D M-7066P M-7066PD
Relay Output
Channels 7
Relay Type PhotoMOS Relay (Form A)
Form A
PhotoMOS
Operating Load Voltage Range 350 V (AC peck or DC) 80 V (AC peck or DC)
Continuous Load Current 0.13 A 1 A
Peak Load Current 0.4 A 3 A
Output Off State Leakage Current 1 uA
Operate Time 2 ms (Max.) 5 ms (Max.)
Release Time 1 ms (Max.) 0.2 ms (Max.)
Electrical Endurance Long Life, And No Arcing, No Bounce, And No Switching Noise
Power-on Value Yes, Programmable
Safe Value Yes, Programmable
 
Models I-7066 I-7066D M-7066P M-7066PD
Communication
Interface RS-485
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 ~ 115200 bps
Protocol DCON DCON, Modbus RTU
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator - Yes, 7 LEDs as Relay Output
Indicators
- Yes, 7 LEDs as Relay Output Indicators
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic 5000 VDC 2000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±4 kV Contact for each Terminal
±8 kV Air for Random Line
EFT (IEC 61000-4-4) ±4 kV for 8 Relay and Power Line
±2 kV for RS-485 Port Line
Surge (IEC 61000-4-5) -
Power
Reverse Polarity Protection Yes
Input Voltage Range 10 ~ 30 VDC
Consumption 0.4 W 0.8 W 0.5 W 0.9 W
Mechanical
Dimensions (W x L x H) 72 mm x 123 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -40 ~ +85 °C
Humidity 10 ~ 95% RH, Non-condensing
 
I-7066 CR 7-channel Photo-Mos Relay Output Module with DCON Protocol (Blue Cover) (RoHS)
I-7066D CR I-7066 with LED Display (Blue Cover) (RoHS)
M-7066P CR 7-channel PhotoMOS Relay Output Module with DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7066PD CR M-7066P with LED Display (Gray Cover) (RoHS)
 
tM-7520U CR RS-232 to RS-485 Converter (RoHS)
tM-7561 CR USB to RS-485 Converter (RoHS)
tM-SG4 CR RS-485 Bias and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7-channel differential or 14-channel single-ended surge protector (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input transformers
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player