home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7060(D)/M-7060(D)/M-7060P/M-7060PD

home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7060(D)/M-7060(D)/M-7060P/M-7060PD

I-7060(D)/M-7060(D)
M-7060P/M-7060PD
4-channel Isolated Digital Input and 4-channel Relay Output Module



Model: I-7060(D)	Model: M-7060(D)
~ NEW ~	~ NEW ~

Model: M-7060P	Model: M-7060PD

I-7060(D)/M-7060(D)
- 2 Form A and 2 Form C Signal Relay Output
- ±2 kV EFT protection for Power Line
M-7060P(D)
- 2 Form A and 2 Form C Power Relay Output
- ±4 kV EFT protection for Power Line
- ±3 kV Surge protection for Power Line
Sink- and Source-type for Digital Input
Digital Input Channels can be used as 16-bit Counters
Configurable Power-on Value Settings
Configurable Safe Value Settings
Dual Watchdog
Wide Operating Temperature Range: -25 ~ +75°C

The 7060 series provides 4 digital input channels, 2 Form A and 2 Form C signal relay output channels, while the M-7060P provides 4 digital input channels, 2 Form A and 2 Form C power relay output channels. All digital input channels can be used as 16-bit counters. In addition, the digital input channels can be selected either as sink- or source-type via wire connections. The “D” versions of the 7060 series provide eight LED indicators that can be used to monitor the status of the digital input and relay output. The “M” versions of the 7060 series support both the Modbus RTU and DCON protocols, which can be configured via software. There are also options for configuring power-on and safe values. 4 kV ESD protection and 3750 VDC intra-module isolation are also provided to enhance noise protection capabilities in industrial environments. The 7060 series is the ideal solution for small signal switching applications, while the M-7060P is the perfect solution for high power applications.

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Model		I-7060	M-7060	M-7060P
		I-7060D	M-7060D	M-7060PD
Relay Output
Channels		4 (Form A × 2, Form C × 2)
Relay Type		Signal Relay		Power Relay
Form A Relay	Contact Rating	0.6 A @ 125 VAC 2 A @ 30 VDC		16A @ 250 VAC 10 A @ 30 VDC
	Min. Contact Load	10 uA @ 10 mV		100 mA @ 6 V
	Contact Material	Gold-plated silver		Silver Tin Alloy
	Operate Time	3 ms		10 ms
	Release Time	2 ms		5 ms
	Mechanical Endurance	1 x 10⁸ ops.		1 x 10⁷ ops.
	Electrical Endurance	5 × 10⁵ ops.		1 × 10⁵ ops.
Form C Relay	Contact Rating	0.6 A @ 125 VAC 2 A @ 30 VDC		NO:10 A @ 250 VAC NC:6 A @ 250 VAC
	Min. Contact Load	10 uA @ 10 mV		100 mA @ 6V
	Contact Material	Gold-plated silver		Silver Tin Alloy
	Operate Time	3 ms		10 ms
	Release Time	2 ms		5 ms
	Mechanical Endurance	1 x 10⁸ ops.		1 x 10⁷ ops.
	Electrical Endurance	5 × 10⁵ ops.		1 × 10⁵ ops.
Surge Strength		1500 VDC		2500 VDC
Power-on Value		Yes
Safe Value		Yes
Digital Input/Counter
Channels		4
Type	Dry Contact	-
	Wet Contact	Sink/Source
On Voltage Level		+1 VDC Max.		+4 VDC Max.
Off Voltage Level		+4 ~ 30 VDC		+10 ~50 VDC
Counters	Max. Count	65535 (16-bit)
	Max. Input Frequency	100 Hz
	Min. Pulse Widt	5 ms
Input Impedance		3 kΩ		10 kΩ
Overvoltage Protection		±35 VDC		±70 VDC

Model	I-7060	M-7060	M-7060P
	I-7060D	M-7060D	M-7060PD
Communication
Interface	RS-485 Modbus RTU, DCON
Format	(N, 8, 1), (N, 8, 2), (E, 8, 1), (O, 8, 1)
Baud Rate	1200 ~ 115200 bps
Protocol	DCON	Modbus RTU, DCON
Dual Watchdog	Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator	Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators	-
	Yes, 8 LEDs as Digital Input/Relay Output Indicators
7-Segment LED Display	-
Isolation
Intra-Module Isolation, Field-to-Logic	3750 VDC
EMS Protection
ESD (IEC 61000-4-2)	±4 kV Contact for each Terminal
	±8 kV Air for Random Point
EFT (IEC 61000-4-4)	±2 kV for Power Line		±4 kV for Power Line
Surge (IEC 61000-4-5)	-		±3 kV for Power Line
Power
Reverse Polarity Protection	Yes
Input Range	10 ~ 30 VDC
Consumption	1 W	1 W	1.4 W
	1.4 W	1.4 W	1.8 W
Mechanical
Dimensions (W x L x H)	72 mm x 123 mm x 35 mm
Installation	DIN-Rail or Wall Mounting
Environment
Operating Temperature	-25 ~ +75°C
Storage Temperature	-40 ~ +85°C
Humidity	10 ~ 95% RH, Non-condensing

I-7060 CR	4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7060-G CR	4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON Protocol (Gray Cover) (RoHS)
I-7060D CR	I-7060 with LED Display (Blue Cover) (RoHS)
I-7060D-G CR	I-7060-G with LED Display (Gray Cover) (RoHS)
M-7060-G CR	4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7060D-G CR	M-7060-G with LED Display (Gray Cover) (RoHS)
M-7060P-G CR	4-channel Isolated Digital Input and 4-channel Relay Output Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7060PD-G CR	M-7060P-G with LED Display (Gray Cover) (RoHS)

tM-7520U CR	RS-232 to RS-485 converter (RoHS)
tM-7561 CR	USB to RS-485 converter (RoHS)
tM-SG4 CR	RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR	4-channel RS-485 Hub (RoHS)
SG-770 CR	7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 series	Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input transformers

|