home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7042/I-7042D/I-7043/I-7043D
 
I-7042/I-7042D
13-channel Isolated Digital Output Module
I-7043/I-7043D/M-7043/M-7043D

16-channel Non-isolated Digital Output Module
 
 
   
Model: I-7042 Model: I-7042D
  ~ NEW ~
Model: I-7043/I-7043D Model: M-7043/M-7043D
 
  • I-7042/I-7042D
    • 13-channel Open Collector Output
    • 3750 Vrms Intra-module Isolation
  • I-7043/I-7043D/M-7043/M-7043D
    • 16-channel Open Collector Output
    • Non-isolated for all channels
  • Sink-type Digital Outputs
  • Configurable Power-on Value Settings
  • Configurable Safe Value Settings
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 to +75°C
 
The I-7042 offers 13 channels digital output channels, each of which features Photocouple isolation and supports sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7042D has 13 LED indicators that can be used to monitor the status of DO channels. 3750 Vrms intra-module isolation is standard.

The I-7043 offers 16 digital output channels, each of which are non-isolated and support sink-type output using an open collector. There are also options to enable both power-on and safe values. The I-7043D has 16 LED indicators that can be used to monitor the status of DO channels. The hardware specifications for the M-7043 are the same as the I-7043, and both support the Modbus RTU and DCON protocols, which can be configured via software.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Models I-7042 I-7043 M-7043
I-7042D I-7043D M-7043D
Digital Output
Channels 13 16
Type Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +3.5 ~ 30 VDC
Max. Load Current 100 mA/Channel
Overvoltage Protection -
Overload Protection -
Power-on Value Yes
Safe Value Yes
 
Models I-7042 I-7043 M-7043
I-7042D I-7043D M-7043D
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 to 115200 bps
Protocol DCON Modbus RTU, DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator - - -
Yes, 13 LEDs as Digital Output Indicators Yes, 16 LEDs as Digital Output Indicators Yes, 16 LED as Digital Output Indicator
7-Segment LED Display -
Isolation
Intra-Module Isolation, Field-to-Logic 3750 Vrms -
EMS Protection
ESD (IEC 61000-4-2) ±2 kV Contact for each Terminal -
±4 kV Air for Random Point -
EFT (IEC 61000-4-4) ±2 kV for Power Line -
Surge (IEC 61000-4-5) -
Power
Reverse Polarity Protection Yes
Input Range 10 ~ 30 VDC
Consumption 1.0 W 0.4 W 0.4 W
1.7 W 1.1 W 1.1 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
 
I-7042 CR 13-channel Isolated Digital Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7042D CR I-7042 with LED Display (Blue Cover) (RoHS)
I-7043 CR 16-channel Non-isolated Digital Output Module using the DCON Protocol (Blue Cover) (RoHS)
I-7043D CR I-7043 with LED Display (Blue Cover) (RoHS)
I-7043D-G CR I-7043 with LED Display (Gray Cover) (RoHS)
M-7043 CR 16-channel Non-isolated Digital Output Module using the DCON and Modbus Protocol (Gray Cover) (RoHS)
M-7043D-CR M-7043-G with LED Display (Gray Cover) (RoHS)
 
tM-7520U CR RS-232 to RS-485 Converter (RoHS)
tM-7561 CR USB to RS-485 Converter (RoHS)
tM-SG4 CR RS-485 Bias and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7-channel Differential or 14-channel single-ended Surge Protector (RoHS)
SG-3000 series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player