I-7024/I-7024R/M-7024/M-7024R/M-7024L
4-channel Analog Output Module |
|
| |
| |
|
 |
 |
| Model: I-7024/I-7024R |
Model: M-7024/M-7024R/M-7024L |
|
|
 |
- I-7024 / M-7024 / M-7024L
- I-7024R / M-7024R
- 4-channel Analog Output and 5-channel Digital Input
- Software Selectable Current or Voltage Output
- Power-on Value Setting
- Safe Value Setting
- 3000 VDC Intra-module Isolation
- Programmable Output Slope
- Dual Watchdog
- Wide Operating Temperature Range: -25 to +75°C
|
|
|
| |
 |
The I-7024 is a 14-bit 4-channel analog output module that provides current and voltage outputs. There are options for power-on values and safe values. It
features 3000 VDC intra-module isolation.
The I-7024R is the same as the I-7024 and provides additional 5-channel digital inputs and 4 KV ESD protection on each terminal.
The M-7024/M-7024R support Modbus RTU and DCON protocols and can be configured via software. Their hardware specifications are the same as those of the I-7024/I-7024R. |
| |
 |
| Building Automation, Factory Automation, Machine Automation, Remote Maintenance, Remote Diagnosis, Testing Equipment. |
| |
 |
| Models |
I-7024 |
M-7024 |
I-7024R |
M-7024R |
M-7024L |
| Analog Output |
| Output Channels |
4 |
| Range |
Voltage |
0 ~ 5 V, ±5 V, 0 ~ 10 V, ±10 V, |
| Current |
0 ~ 20 mA, 4 ~ 20 mA |
| Resolution |
14-bit |
12-bit |
| Accuracy |
0.1% |
| DA Output Response Time |
10 ms |
Open Wire Detection
(for current only) |
- |
| Channel to Channel Isolation |
- |
| Power-on Value |
Yes |
| Safe Value |
Yes |
| Digital Input |
| Channels |
- |
5 |
- |
| Input Type |
- |
Dry Contact (Source) |
- |
| Contact Level |
On Voltage Level |
- |
Close to GND |
- |
| Off Voltage Level |
- |
Open |
- |
| Counters |
Max. Count |
- |
16-bit (65535) |
- |
| Max. Input Frequency |
- |
50 Hz |
- |
| Min. Pulse Width |
- |
10 ms |
- |
|
| |
 |
| Models |
I-7024 |
M-7024 |
I-7024R |
M-7024R |
M-7024L |
| Communication |
| Interface |
RS-485 |
| Bias Resistor |
No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.) |
| Format |
(N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1) |
| Baud Rate |
1200 ~ 115200 bps |
| Protocol |
DCON |
Modbus RTU, DCON |
DCON |
Modbus RTU, DCON |
| Dual Watchdog |
Yes, Module (1.6 Seconds), Communication (Programmable) |
| LED Indicator/Display |
| System LED Indicator |
Yes, 1 LED as Power/Communication Indicator |
| I/O LED Indicator |
- |
| 7-Segment LED Display |
- |
| Isolation |
| Intra-Module Isolation, Field-to-Logic |
3000 VDC |
| EMS Protection |
| ESD (IEC 61000-4-2) |
±2 kV Contact for Each Terminal |
±4 kV Contact for Each Terminal |
±8 kV Contact for Each Terminal |
| EFT (IEC 61000-4-4) |
- |
±4 kV to Power Line |
| RS (IEC 61000-4-3) |
- |
5 V/m, 80 MHz ~ 1GHz |
| Power |
| Reverse Polarity Protection |
Yes |
| Input Range |
+10 ~ +30 VDC |
| Consumption |
2.4 W |
3.2 W |
2.7 W |
| Mechanical |
| Dimensions (L x W x H) |
123 mm x 72 mm x 35 mm |
| Installation |
DIN-Rail or Wall Mounting |
| Environment |
| Operating Temperature |
-25 to +75°C |
| Storage Temperature |
-40 to +85°C |
| Humidity |
10 to 95% RH, Non-condensing |
|
| |
 |
| I-7024 CR |
4-channel Analog Output Module with DCON Protocol (Blue Cover) (RoHS) |
| I-7024-G CR |
4-channel Analog Output Module with DCON Protocol (Gray Cover) (RoHS) |
| I-7024R-G CR |
4-channel Analog Output and 5-channel DI Module with DCON Protocol(Gray Cover) (RoHS) |
| M-7024-G CR |
4-channel Analog Output Module with DCON and Modbus Protocol (Gray Cover) (RoHS) |
| M-7024R-G CR |
4-channel Analog Output and 5-channel DI Module with DCON and Modbus Protocol (Gray Cover) (RoHS) |
| M-7024L-G CR ~ NEW ~ |
12-bit 4-channel Analog Output Module using the DCON and Modbus Protocol (Gray Cover) (RoHS) |
|
| |
 |
| tM-7520U CR |
RS-232 to RS-485 converter (RoHS) |
| tM-7561 CR |
USB to RS-485 converter (RoHS) |
| tM-SG4 CR |
RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS) |
| I-7514U CR |
4-channel RS-485 Hub (RoHS) |
| SG-770 CR |
7 channel differential or 14 channel single-ended surge protector (RoHS) |
| SG-3000 series |
Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Inputs |
|
| |
|
|
| |
|
|
