home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7016P/I-7016PD
 
I-7016P/I-7016PD
1-channel Strain Gauge Input Module
 
   
Model: I-7016P Model: I-7016PD
 
  • Long-distance Strain Gauge Measurement
  • High Resolution: 16-bit
  • Excitation Voltage Output : 0 ~ +10 V
  • 50 Hz Event Counter (Digital Input)
  • High/Low Alarm (Digital Output)
  • 3000 VDC Intra-module Isolation
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 to +75°C
 
The “P” version of the I-7016 module is another milestone in the development of the I-7016 series, and is a testament to excellence by the R&D team at ICP DAS. The I-7016P is specifically designed for long-distance strain gauge measurement, and provides 1 Digital Input channel as a 50 Hz event counter and 4 Digital Output channels that can act as high or low alarms. The I-7016P also features 3000 VDC intra-module isolation.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Models I-7016P I-7016PD
Strain Gauge Input
Channels 1
Wiring 6-wire
Sensor Types Full-Bridge
Resolution 16-bit
Accuracy ±0.05% of FSR
Sampling Rate 10 Hz
Input Impedance 20 MΩ
Individual Channel Configuration -
Overvoltage Protection ±5 VDC
Open Wire Detection -
Long Distance Measurement Yes
Excitation Voltage Output
Channels 1
Range 0 ~ +10 V
Max. Load Current 40 mA
Resolution 16-bit
Accuracy ±0.05%
Power-on Value Yes
Digital Input
Channels 1
Contact Dry
Sink/Source (NPN/PNP) Source
ON Voltage Level Close to GND
OFF Voltage Level Open
Counter (50 Hz, 16-bit) Yes
Input Impedance 3 kΩ
Overvoltage Protection ±30 VDC
Digital Output
Channels 4
Type Open Collector
Sink/Source (NPN/PNP) Sink
Load Voltage +3.5 ~ +50 VDC
Max. Load Current 30 mA/Channel
Power-on Value Yes
Safe Value Yes
 
Models I-7016P I-7016PD
Communication
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format N, 8, 1
Baud Rate 1200 to 115200 bps
Protocol DCON
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicator -
7-Segment LED Display - Yes
Isolation
Intra-Module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for each Terminal
8 kV Air for Random Point
EFT (IEC 61000-4-4) ±4 kV for Power Line
Power
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 1.3 W
Mechanical
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Environment
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
 
I-7016P CR 1-channel Strain Gauge Input Module using the DCON Protocol (6-wire) (Blue Cover) (RoHS)
I-7016PD CR I-7016P with 7-segment LED Display (6-wire) (Blue Cover) (RoHS)
 
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player