home > product> solutions > remote i/o modules/units > I-7000 & M-7000 > I-7013/I-7013D/M-7013P/M-7013PD
1-channel RTD Input Module
  ~ NEW ~
Model: I-7013/I-7013D Model: M-7013P/M-7013PD
  • M-7013P and M-7013PD
    • High/Low Alarm for Digital Output
    • 50Hz Event Counter for Digital Input
    • ±120 VDC Overvoltage Protection
  • 1-channel RTD Input
  • Lead Resistance Elimination for 3/4-wire Connection
  • Open Wire Detection
  • 3000 VDC Intra-module Isolation
  • Dual Watchdog
  • Wide Operating Temperature Range: -25 to +75°C
The I-7013(D) and M-7013P(D) is a 1-channel RTD Input module that is used for measuring temperatures via an RTD sensor and supports Pt100, Ni120, and Pt1000 type sensors. The module allows 2/3/4-wire RTD connections and features open wire detection. In addition, the I-7013(D) and M-7013P(D) also includes 3000 VDC intra-module isolation and supports lead resistance elimination for 3/4-wire connections. The M-7013P and M-7013PD added support for 1-channel digital input as 50 Hz event counter and 2-channel digital output as high/low alarm. The M-7013P and M-7013PD support both the Modbus RTU and DCON protocols, which can be confi gured via software.
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
Models I-7013 I-7013D M-7013P M-7013PD
RTD Input Module
Channels 1
Wiring 2/3/4-wire
Sensor Type Pt100, Pt1000, Ni120
Resolution 16-bit
Accuracy ±0.05%
Sampling Rate 10 Hz
Individual Channel Configuration No
Overvoltage Protection ±5 VDC ±120 VDC
Open Wire Detection Yes
3-wire RTD Lead Resistance Elimination Yes
Resistance Measurement 3.2 kΩ Max.
Digital Input
Channels - 1
Sink/Source (NPN/PNP) Source, Dry Contact
ON Voltage Level Close to GND
OFF Voltage Level Open
Counter(50 Hz, 16-bit) Yes
Overvoltage Protectio ±30 VDC
Digital Output
Channels - 2
Type Open Collector, MOSFET
Sink/Source (NPN/PNP) Sink
Load Voltage 3.5 ~ 50 VDC
Max. Load Current 700 mA/Channel
Overvoltage Protection 60 VDC
Overload Protection 1.4 A (with Short-circuit Protection)
Power-on Value Yes
Safe Value Yes
Models I-7013 I-7013D M-7013P M-7013PD
Interface RS-485
Bias Resistor No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate 1200 to 115200 bps
Protocol DCON DCON Modbus/RTU
Dual Watchdog Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator Yes, 1 as Power/Communication Indicator
I/O LED Indicator -
7-Segment LED Display - Yes - Yes
Intra-Module Isolation, Field-to-Logic 3000 VDC
EMS Protection
ESD (IEC 61000-4-2) ±2 kV Contact for each Terminal ±4 kV Contact for each Terminal and 8 kV Air for
random point
EFT (IEC 61000-4-4) ±4 kV to Power Line
Surge (IEC 61000-4-5) ±0.5 kV for Power Line
Reverse Polarity Protection Yes
Input Range +10 ~ +30 VDC
Consumption 0.7 W 1.3 W 0.6 W 1.2 W
Dimensions (L x W x H) 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall Mounting
Operating Temperature -25 to +75°C
Storage Temperature -40 to +85°C
Humidity 10 to 95% RH, Non-condensing
I-7013 CR 1-channel RTD Input Module using the DCON Protocol (Blue Cover) (RoHS)
I-7013-G CR 1-channel RTD Input Module using the DCON Protocol (Gray Cover) (RoHS)
I-7013D CR I-7013 with 7-segment LED Display (Blue Cover) (RoHS)
M-7013P-G CR 1-channel RTD Input Module using the DCON and Modbus Protocols (Gray Cover) (RoHS)
M-7013PD-G CR M-7013P with 7-segment LED Display (Gray Cover) (RoHS)
tM-7520U CR RS-232 to RS-485 converter (RoHS)
tM-7561 CR USB to RS-485 converter (RoHS)
tM-SG4 CR RS-485 Pull-high/Pull-low and Termination Resistor Module (RoHS)
I-7514U CR 4-channel RS-485 Hub (RoHS)
SG-770 CR 7 channel differential or 14 channel single-ended surge protector (RoHS)
SG-3000 Series Signal Conditioning Modules for Thermocouple, RTD, DC Voltage, DC Current and Power Input Transformers

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player