home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8084
 
F-8084
8-channel Isolated High Speed Pulse Input Module
 
 
~ NEW ~
Model: F-8084
 
  • 32-bit counter
  • 8 up-counter/frequency channels
  • 1 ~ 32767 us digital filter
  • Falling/Rising/Both edge trigger
  • RoHS compliance
  • 3000 VDC isolation from output to backplane
  • 3000 VDC isolation from output to frame ground
  • Redundancy
  • No error counting when redundant switching
 
The F-8084 is a 32-bit high speed up-counter/frequency module. It can count up to 500 KHz input signal, and accuracy of the frequency mode is +/-0.4% FSR. The F-8084 features many diagnostic like some failures of communication, EEPROM, WDT, decoder, etc. When the modules are in the redundant mode and a failure occurs the slave module will take over as soon as possible. Moreover, the redundant switching is not only fast but also reliable for data exchanging. Thus, users can easily to use F-8084 to count.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Parameter Value
Feature
Redundant Yes (The counting error less than 1 counter when input signal < 10 KHz)
Termination board break off detection Yes
Digital filter Yes (1~32767us)
LED indicator 1 RUN, 1 ACT, 1 DUX
Pulse Input
Number of channels 8
Type Counter/Frequency
Min. Pulse Width 2 us
Input Frequency Range 1 Hz ~ 500 KHz
Rated Voltage 30 VDC
Input voltage range, "1" 4.5 VDC~ 30 VDC
Input voltage range, "0" < 1 VDC
Detection time 2 us
Input impedance 200/500/1KΩ or none (5 KΩ)
Nominal input channel current 20mA @ 24VDC
Maximum input current 25mA @ 30VDC
Certification
EMC EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board DN-PI-M
Maximum power consumption 1.9 W
Operating temperature -25°C ~ +75°C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30 mm x 85 mm x 115 mm
 
F-8084 CR 8-channel Isolated High Speed Pulse Input Module (Gray Cover)(RoHS)
 
DN-37-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-PI-M Termination board for pulse input modules
CA-3710AM 1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM 2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM 3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM 5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM 10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player