home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O

home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8017CH

F-8017CH
8-channel Isolated Current Input Redundant Module with HART Master Interface

~ NEW ~

Model: F-8017CH


8 current input channels Overrange measurement Built-in HART master interface RoHS compliance 3000 VDC isolation from output to backplane 3000 VDC isolation from output to frame ground Redundancy Fast redundant switching time (<100us)

The F-8017CH is a 16-bit, 8-channel analog differential input module. This module accepts current input range 4~20mA and supports 25% over range measurement (Accuracy is not guaranteed). Besides, it has ±0.05% accuracy for highly accurate application. Moreover, this module provides 500Hz sampling rate for some application. In addition to current input, F-8017CH is also built-in HART master interface to remotely maintain devices via HART. The F-8017CH provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.

Building Automation
Factory Automation
Machine Automation
Remote Maintenance
Remote Diagnosis
Testing Equipment

Feature
HART interface	Yes, supports HART master
Over-Current Protection	Yes (Switching time < 100us)
Over-Current Protection	Yes
Termination board break off detection	Yes
LED indicator	1 RUN, 1 ACT, 1 DUX
Analog Input
Number of channels	8
Type	4 ~ 20 mA (Support ±25% overrange
Maximum Allowable Input Current	25 mA
Resolution	16 bit
Sampling Rate	500 Samples/sec(Total)
Accuracy	±0.05% FSR
Zero Drift	±20 μV/°C
Common Mode Rejection	86 dB
Normal Mode Rejection	100 dB
Input Impedance	120 Ω
Data Range	-2500~12500
Isolation	3000 VDC
HART
Mode	Master, Monodrop (Point-to-Point)
Certification
EMC	EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board	DN-AIH-08
Maximum power consumption	1.2 W + 7.5W¹
Operating temperature	-25°C~ +75°C
Humidity	5 ~ 95 % RH, Non-condensing
Weight	300 g
Dimensions (W x L x H)	30 mm x 85 mm x 115 mm

1. F-8017CH provides the power for the passive loop, so there will be an extra power for the transmitter in the field. The amount of power consumption depends on the number of transmitters.

F-8017C1 CR

8-channel Isolated Current Input Redundant Module with HART Master Interface(Gray Cover)(RoHS)

DN-37-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A	I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-AIH-08	Termination board for current input with HART master interface modules
CA-3710AM	1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM	2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM	3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM	5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM	10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D	DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D	DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)

TOP

HOME

這個頁面上的內容需要較新版本的 Adobe Flash Player。