home > product> solutions > remote i/o modules/units > iDCS Redundancy I/O > F-8015
 
F-8015
8-channel Isolated RTD Input Redundant Module
 
 
~ NEW ~
Model: F-8015
 
  • 8 RTD input channels
  • User defined up/down scale
  • Open wire detection
  • RoHS compliance
  • 3000 VDC isolation from input to backplane
  • 3000 VDC isolation from input to frame ground
  • Redundancy
  • Fast redundant switching time (<100us)
 
The F-8015 is a 16-bit, 8-channel RTD input module that features programmable input range on all channels. This module has ±0.05% accuracy for highly accurate application. Besides, the F-8015 provides 3000 VDC optical isolation between channels and backplane bus. If any high voltage or current damages these channels, this module won’t affect other component in iDCS-8000 system.
 
  • Building Automation
  • Factory Automation
  • Machine Automation
  • Remote Maintenance
  • Remote Diagnosis
  • Testing Equipment
 
Feature
Redundant Yes (Switching time < 100us)
Over Voltage Protection Yes
Termination board break off detection Yes
Open Wire Detection Yes
LED indicator 1 RUN, 1 ACT, 1 DUX
RTD Input
Number of channels 8
Type Pt-100 IEC 60751 ITS90 (0.03851 Ω/Ω/°C)
JPt-100 JIS C 1604 (0.03916 Ω/Ω/°C)
Pt-1000 IEC 60751 ITS90 (0.03851 Ω/Ω/°C)
Temperature Range Pt100 -200 ~ +850
JPt-100 , Pt1000 -200 ~ +630
Maximum Allowable Input Voltage 120 VDC
Resolution 16 bit
Sampling Rate 8 Samples/sec (Total)
Accuracy ±0.05% FSR (±250 mΩ)
Zero Drift ±0.5 μV/°C
Span Drift ±20 ppm/°C
Common Mode Rejection 106 dB
Normal Mode Rejection 90 dB
Input Impedance 20 MΩ
Data Range -2500 ~ 12500
Isolation 3000 VDC
Certification
EMC EN61000-6-2, EN61000-6-4, IEC/EN 61000-4-2, IEC/EN 61000-4-4
General
Termination board DN-RTD-M
Maximum power consumption 1 W
Operating temperature -25°C~ +75°C
Humidity 5 ~ 95 % RH, Non-condensing
Weight 300 g
Dimensions (W x L x H) 30mm x 85mm x 115mm
 
F-8015 CR 8-channel Isolated RTD Input Redundant Module (Gray Cover)(RoHS)
 
DN-37-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 5.08 mm)
DN-37-381-A I/O Connector Block with DIN-Rail Mounting and 37-pin D-sub Connector (pitch: 3.81 mm)
DN-RTD-M Termination board for RTD input modules
CA-3710AM 1m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3720AM 2m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3730AM 3m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3750AM 5m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-37100AM 10m 37-pin Male-Female D-sub cable, 24AWG, UL-2464
CA-3710D DB-37 Male-Male D-sub cable 1M, Cable for Daughter Board (180o)
CA-3720D DB-37 Male-Male D-sub cable 2M, Cable for Daughter Board (180o)
 
TOP | HOME
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player