PIO-821H/PIO-821L/PIO-821HU/PIO-821LU
PCI Bus/Universal PCI, 12-bit 45 kS/s 16-ch A/D, 12-bit 1-ch D/A Multi-function DAQ Board |
|
| ~ Will be phased out ~ |
|
 |
- PIO-821L/H為 PCI bus介面，支援 +5 V PCI bus插槽
- PIO-821LU/HU 為Universal PCI介面，支援 +3.3 V 及+5 V PCI bus 插槽
- 12-bit A/D 轉換器最高取樣率達45K samples/sec
- 支援軟體選擇類比輸入範圍
- 支援A/D觸發模式: software trigger, pacer trigger, external trigger
- 16個單端式輸入通道/8個差動式輸入通道
- PIO-821H/HU支援可程式設定High Gain: 1, 10, 100, 1000
- PIO-821L/LU支援可程式設定Low Gain: 1,2,4,8
- PIO-821H/HU 支援類比輸入範圍: ±5V,±0.5V, ±0.05V,±0.005V
- PIO-821L/LU支援類比輸入範圍: ±5V,±2.5V,±1.25V,±0.625V
- 1 通道的 12-bit D/A 輸出
- 16個 5V/TTL數位輸入通道及16 5V/TTL數位輸出通道
- PIO-821LU/HU支援Card ID (SMD開關)
- PIO-821LU/HU的數位輸入端可設定pull-high 或pull-low
- 支援中斷功能
|
|
 |
| Model: PIO-821H/PIO-821L |
| |
 |
| Model: PIO-821HU/PIO-821LU |
|
|
| |
 |
PIO-821HU/LU板卡是泓格新上市並符合RoHS環保規範的產品，新的PIO-821HU/LU的設計可直接相容於PIO-821H/L。
PIO-821系列卡是一張相容於PC/AT的高性能多功能資料擷取卡。PIO-821HU/LU 支援 3.3 V/5 V PCI bus 介面，PIO-821L/H支援5 V PCI bus介面。他們都提供有12位元解析度的A/D 轉換器且最大採樣率達到高達約45K samples/sec 、16個單端/8個差動輸入通道、12位元解析度的D/A輸出通道、16個符合TTL規範的數位輸入通道及16個符合TTL規範的數位輸出通道。PIO-821L/LU支援有可程式設定Low Gain放大值 1、2、4、8，PIO-821H/HU支援有程式設定High Gain 放大值 1、10、100、1000。
PIO-821HU/LU 還新增了二種實用功能, 第一種是 Card ID 指撥開關, 讓使用者可以自由設定每張板卡的識別碼.當系統同時使用多張 PIO-821HU/LU 板卡時,使用者可以迅速而簡單區別這些同型號的板卡。第二種是 DI Pull High/Low 設定功能, 數位輸入埠可設定為 pull-high 或 pull-low ，當信號線脫落或斷線時，該 DI 值會相對維持 High 或 Low 的狀態(非浮動)。
此系列卡支援在Linux、DOS、Windows 98/NT/2000、32/64-Bit Windows XP/2003/Vista/2008/7/8等作業系統環境下使用，還提供有動態函式庫及Active X控制項使開發更加容易及簡單易懂的各種語言範例程式，如Turbo C++、Borland C++、Microsoft C++、Visual C++、Borland Delphi、Borland C++ Builder、Visual Basic、Visual C#.NET、Visual Basic.NET及LabVIEW等，讓用戶能夠快速的上手來使用。 |
| |
 |
- 高速資料擷取系統
- 製程監控與管制
- 振動分析
- 數位訊號產生器
|
| |
 |
- 支援DOS Lib 及TC範例程式 (包含 source codes)
- 支援Windows 95/98/NT/2K 的DLL 及 OCX SDK
- 支援32-bit/64-bit Windows XP/2003/2008/7/8/10 的 DLL 及 SDK
- 支援VB/VC/Delphi/BCB/VB.NET/C#.NET/VC.NET/MATLAB 範例程式 (包含 source codes)
- 支援Windows LabVIEW 開發工具
- 支援 Linux 驅動程式
|
| |
 |
| Model Name |
PIO-821LU |
PIO-821HU |
PIO-821L |
PIO-821H |
| Analog Input |
| Channels |
16 single-ended/8 differential |
| A/D Converter |
12-bit, 8 μs Conversion time |
| Sampling Rate |
45 kS/s. max. |
| FIFO Size |
N/A |
| Over voltage Protection |
Continuous +/-35 Vp-p |
| Input Impedance |
10 MΩ/6 pF |
| Trigger Modes |
Software, Internal programmable pacer |
| Data Transfer |
Polling, Interrupt |
| Accuracy |
0.01 % of FSR ±1 LSB @ 25 °C, ± 10 V |
| Zero Drift |
+/- 4 ppm/°C of FSR |
| Analog Output |
| Channels |
1 |
| Resolution |
12-bit |
| Accuracy |
0.01% of FSR ± 1/2 LSB @ 25 °C, ± 10 V |
| Output Range |
Unipolar:0 ~ 5 V, 0 ~ 10 V, 0 ~ Ext Ref |
| Output Driving |
+/- 5 mA |
| Slew Rate |
0.3 V/μs |
| Output Impedance |
0.1 Ω max. |
| Operating Mode |
Software |
| Dgital Input |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Input Voltage |
Logic 0: 0.8 V max.
Logic 1: 2.0 V min. |
| Response Speed |
1.2 MHz (Typical) |
| Digital Output |
| Channels |
16 |
| Compatibility |
5 V/TTL |
| Output Voltage |
Logic 0: 0.4 V max.
Logic 1: 2.4 V min. |
| Output Capability |
Sink: 2.4 mA @ 0.8 V
Source: 0.8 mA @ 2.0 V |
| Response Speed |
1.2 MHz (Typical) |
| Timer/Counter |
| Channels |
3(Internal pacer x 1/Independent x 2) |
| Resolution |
16-bit |
| Compatibility |
5 V/TTL |
| Input Frequency |
10 MHz max. |
| Reference Clock |
Internal: 2 MHz |
| General |
| Bus Type |
3.3 V/5 V Universal PCI, 32-bit, 33 MHz |
5 V PCI, 32-bit, 33 MHz |
| Data Bus |
8-bit |
| Card ID |
Yes (4-bit) |
No |
| I/O Connector |
Female DB37 x 1
20-pin box header x 2 |
| Dimensions (L x W x D) |
159 mm x 97 mm x 22 mm |
183 mm x 105 mm x 22 mm |
| Power Consumption |
960 mA @ +5 V |
| Operating Temperature |
0 ~ 60 °C |
| Storage Temperature |
-20 ~ 70 °C |
| Humidity |
5 ~ 85% RH, non-condensing |
| Analog Input Range |
| Model |
PIO-821L/LU (Low-Gain) |
| Gain |
1 |
2 |
4 |
8 |
| Bipolar |
+/- 5 |
+/- 2.5 |
+/- 1.25 |
+/- 0.625 |
| Sampling Rate Max. |
45 kS/s |
|
| Model |
PIO-821H/HU (High-Gain) |
| Gain |
1 |
10 |
100 |
1000 |
| Bipolar |
+/- 5 |
+/- 0.5 |
+/- 0.05 |
+/- 0.005 |
| Sampling Rate Max. |
45 kS/s |
10 kS/s |
1 kS/s |
|
|
| |
 |
| PIO-821H CR |
PCI bus, 45 kS/s High gain 12-bit,16-channel input, 1-channel D/A, Digital I/O board. (RoHS) |
| PIO-821L CR |
PCI bus, 45 kS/s Low gain 12-bit,16-channel input, 1-channel D/A, Digital I/O board. (RoHS) |
| PIO-821H/S CR |
PIO-821H + Daughter Board DB-8225. (RoHS) |
| PIO-821HU CR |
Universal PCI, 45 kS/s High gain 12-bit,16-channel input, 1-channel D/A, Digital I/O board. (RoHS)
Includes one CA-4002 D-Sub connector. |
| PIO-821LU CR |
Universal PCI, 45 kS/s Low gain 12-bit,16-channel input, 1-channel D/A, Digital I/O board. (RoHS)
Includes one CA-4002 D-Sub connector. |
|
| |
 |
| CA-2010 |
20-pin flat cable,1 M |
| CA-2020 |
20-pin flat cable 2 M. |
| CA-3710 |
DB-37 Male-Male D-sub cable 1 M (Cable for Daughter Board(45°)) |
| CA-3710D |
DB-37 Male-Male D-sub cable 1M (Cable for Daughter Board(180°)) |
| CA-3715DM-H |
DB-37 Male-Male Cable, 1.5 M, 180°. (RoHS) |
| CA-3730DM-H |
DB-37 Male-Male Cable, 3.0 M, 180°. (RoHS) |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| DB-8225 |
Screw Terminal Board For Analog I/O |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
| DN-37 |
DIN Rail Mounting 37-pin Connector |
| DB-889D |
16-channel Analog Input Multiplexer Board |
| DB-16P |
16-channel Isolated Digital Input Daughter Board |
| DB-16R |
16-channel Relay Output Daughter Board |
| DB-24C |
24-channel Open Collector Output Daughter Board |
| DB-24OD |
24-channel Open-Drain Output Board |
| DB-24SSR |
24-channel SSR Output Board |
| DN-20/DN-20-381 |
20-pin Din-Rail mounting I/O connector board |
| 125Ω, 0.1% DIP Resistors |
125 Ω External Resistor for use with Current Input |
|
| |
 |
| |
 |
|
| |
|
|
| |
|
|
