home > product> solutions > intelligent power meter > PM-2133 Series
 
PM-2133 Series
3 Phase Compact Smart Meter
 
~ Phased out ~  
  • True RMS energy and power parameters measurement in compact size.
  • Easy wiring for on-line installation.
  • RS-485 communication supported Modbus RTU protocol , CANopen Communication supported Compatible with CANopen specification DS-301.
  • Wh accuracy better than 1%(PF=1).
  • With wired clip-on CT (various types support input current up to 200A).
 
Model: PM-2133 Series  
 
It's always difficult but crucial to the supervisors to figure out how much energy is consuming. ICP DAS brings the most powerful, cost effective, advanced Compact Power Meters, PM-2133 series, to the markets.

With its high accuracy (1%, PF=1), the PM-2133 series products can be applied both on low voltage primary side and/or medium/high voltage secondary side and enable the users to obtain in real time the reliable and accurate energy consumption readings from the monitored equipments while in operation. These compact size and cost effective Power Meters are equipped with revolutionary wired clip-on CT (various types support input current up to 200A) and standard Modbus communication RS-485 protocol for easy deployment. It works with input voltages ranging 10V ~ 500V, supporting a wide range of applications.

ICP DAS offers PM-2133 family in a full range Three-phase compact power meters for power monitoring. The products offer a rich feature set combined with easy-to-integrate communications.
 
The PM-2133-CPS series power meter provides the CANopen interface for users to easily gather the real-time power consumption information in their CANopen applications. The PM-2133-CPS can be used as CANopen slave device. It provides SDO and PDO objects to response the data measured by the power meter. Users also can use PDO event timer to make PDO automatically transmitted. In addition, the PM-2133-CPS also owns the arbitration mechanism which can avoid data collision and error detection.
 
CANopen Features
  • NXP TJA1042 CAN transceiver
  • Follow CANopen DS-301 specification
    • NMT: Slave
    • NMT Error Control: Node Guarding and Heartbeat Consumer
    • No. Of SDO: 1 Server
    • No. Of PDO: 20 TxPDO, 0 RxPDO
    • PDO Mode: Event Timer, Remotely Requested, Cyclic and Acyclic SYNC
  • Support baud rate 10 kbps, 20kbp, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps and 1000 kbps
  • Support up to 127 nodes on the CANopen network
  • 2500 Vrms isolation on CAN port.
  • 4 kV ESD protection on CAN port.
 
Model PM-2133 PM-2133-CPS
Input Voltage 10 - 500 V
Input Current CT Φ10 mm (60 A), CT Φ16 mm (100 A), CT Φ24mm (200 A)
Aux Power DC +10 ~ +30 V
Frequency 60/50 Hz
Starting I <0.025A
Wiring diagram Auto or manual stting 1P2W-1CT, 1P3W-2CT, 3P3W-2CT, 3P3W-3CT, 3P4W
Power Parameters Measures VA, VB, VC, Vave
I A, I B,I C, I ave
kWA, kWB, kWC, kWtot
kVAA, kVAB, kVAC, kVAtot
kvarA, kvarB, kvarC, kvartot
PFA, PFB, PFC, PFtot
kWhA , kWhB, kWhC, kWhtot
kVAhA , kVAhB, kVAhC, kVAhtot
kvarhA , kvarhB, kvarhC, kvarhtot
Communication Protocol:Modbus-RTU
RS485, half duplex isolated
Baud Rate:9600, 19200(default), 38400

Protocol:CANopen
Baud Rate: 10 k,20 k,50 k 125 k(default),250 k,500 k,800 k,1000 k
kWh Accuracy 1%(PF=1)
Dimension 78(L) × 35(W) × 99(H) mm
Operating Temperature -10 °C ~ 70 °C
Installation Rail-mounted
 
PM-2133: 3 Phase Compact Smart Meter
*CT number: 3CT's
 
100: CTΦ10 mm (0 ~ 60 A) 160: CTΦ16 mm (0 ~ 100 A)
240: CTΦ24 mm (0 ~ 200 A)  
 
 
Modbus RTU Series
PM-2133-100 3 Phase Compact Smart Meter /CT:3pcs,Φ10mm(0-60A)/English
PM-2133-160 3 Phase Compact Smart Meter /CT:3pcs,Φ16mm(0-100A)/English
PM-2133-240 3 Phase Compact Smart Meter /CT:3pcs,Φ24mm(0-200A)/English
CANopen Series
PM-2133-100-CPS 3 Phase Compact Smart Meter /CT:3pcs,Φ10mm(0-60A)/English /CANopen , Modbus RTU
PM-2133-160-CPS 3 Phase Compact Smart Meter /CT:3pcs,Φ16mm(0-100A)/English /CANopen , Modbus RTU
PM-2133-240-CPS 3 Phase Compact Smart Meter /CT:3pcs,Φ24mm(0-200A)/English /CANopen , Modbus RTU
 
MDR-20-24 24 VDC/1.0 A, 24 W Power Supply with DIN-Rail Mounting (RoHS)
MDR-60-24 24 V/2.5 A, 60 W Power Supply with DIN-Rail Mounting (RoHS)
DIN-KA52F CR 24 VDC/1.04 A, 25 W Power Supply with DIN-Rail Mounting (RoHS)
I-7561 CR USB to RS-232/422/485 Converter (RoHS)
I-7565-H1 CR High Performance Intelligent USB to CAN Converter (RoHS)
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player