home > product> solutions > industrial wireless communication> ZigBee wireless solutions > ZT-2060-IOG
 
ZT-2060-IOG
ZigBee I/O Pair-connection Module with the 6-channel Isolated Digital Input and
4-channel Relay Output
 
~ NEW ~
Model: ZT-2060-IOG
 
  • ISM 2.4 GHz Operating Frequency
  • Fully Compliant with 2.4G IEEE 802.15.4 / ZigBee Specifications
  • Supports AES-128 Encryption for the Wireless Communication
  • Wireless Transmission Range up to 700 m (Default)
  • Adjustable RF Transmission Output Power
  • Physical Pair-connection Channels of 6 Digital Input and 4 Relay Output
  • 280 Logical Pair-connection Channels Supported
  • Configurable I/O Pairing Relationship
  • DO Safe Value Setting for Wireless Disconnection Monitoring
  • Surge and ESD Protection
  • DIN-Rail Mountable
 
ZT-20xx-IOG series (referred to as ZT-IOG) is a series of ZigBee wireless communication module with Digital Input and Digital Output channels. The “IOG” in the ZT-IOG is the abbreviation for the I/O Group and means the multi-to-multi Pair-connection I/O modules.

The ZT-2060-IOG module is one of the ZT-20xx-IOG series that provides both 6 digital input channels and 4 relay output channels. User can easily configure it as either a ZigBee Coordinator or a ZigBee Router via the external switches.

The ZigBee Coordinator will serve as a message processing and distribution center. In other words, as long as any DI of any ZT-IOG module changes its channel state, it will immediately trigger an event and upload it to the ZigBee Coordinator for I/O updating logic calculations to determine the DO output states of the ZT-IOG system. Then, the ZigBee Coordinator will broadcast a message periodically to all ZT-IOG ZigBee Router modules for synchronizing all DO channel states to achieve the multi-to-multi I/O Pair-connection function.
 
 
Digital Input
Input Channels 6
Input Types Isolated, Wet Contact (Sink/Source)
Input Level On Voltage Level +3.5 VDC ~ +30 VDC
Off Voltage Level Max. +1 VDC
Input Impedance 3 kΩ, 0.33 W
Relay Output
Output Channels 4
Output Types Power Relay, Form A
Contact Rating 5 A @ (250 VAC/30 VDC)
Max. Contact Voltage 270 VAC/125 VDC
Release Time Max. 5 ms at Rated Voltage
Endurance Electrical Resistive Load: 100,000 ops. min. (10 ops/minute)
Mechanical At No Load: 20,000,000 ops. min. (300 ops/minute)
Insulation Resistance Min. 1000M Ω at 500 VDC
Surge Strength 5,080 V (1.2 / 50us)
 
Communication Interface
Wireless Standards ZigBee 2007 Pro
Transmission Power 11 dBm (Default, FCC Certificated); Max. 19 dBm
2.4 GHz Antenna 5 dBi Omni directional
Transmission Range (LoS) 700 m (Typical)
Max. Slaves in a ZigBee Network 255
LED Indicators
Power 1 LED, Red
ZigBee Communication 1 LED, Green
Digital Input and Output 6 Green LEDs for Digital Input
4 Red LEDs for Relay Output
Isolation
Intra-module Isolated, Field-to-Logic 2500 VDC
EMS Protection
ESD (IEC 61000-4-2) 4 kV Contact for Power Line, Communication Line and each Channel, 8 kV Air for Random Point
EFT (IEC 61000-4-4) 4 kV for Power Line
Power
Input Voltage Range +10 VDC ~ +30 VDC
Power Consumption Max. 1.4 W
Mechanical
Flammability Fire Retardant Materials (UL 94V-0 Level)
Dimensions (L x W x H) 94 mm x 33 mm x 110 mm
Installation DIN-Rail
Environment
Operating Temperature -25 ~ +75°C
Storage Temperature -30 ~ +80°C
Relative Humidity 10 ~ 90% RH, Non-condensing
 
ZT-2060-IOG CR ZigBee I/O Group (Pair-connection) Module with the 6-channel Isolated Digital Input and 4-channel Relay Output (Full-function) (RoHS)
Important Note: If there is any requirement to do the advanced configuration, please remember to order at least one ZT-USBC or ZT-2570 ZigBee converter.
 
ZT-2570 CR Ethernet/RS-485/RS-232 to ZigBee Converter (Host, ZigBee Coordinator) (RoHS)
ZT-USBC CR USB to ZigBee Converter (ZigBee Full-function) (RoHS)
ZT-2510 CR ZigBee Repeater (Slave, ZigBee Router) (RoHS)
External Antenna 2.4GHz External Antenna, RP-SMA Male (Plug)
Extension Cable 3S00x-1, RG58A/U x Meter Long RP-SMA (male) to RP-SMA (female)
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player