home > product> solutions > industrial ethernet switch & fiber switch > Selection Guide > NSM-205GP
 
NSM-205GP
4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports
 
~ NEW ~  
  • Full Gigabit Ethernet ports
  • 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
  • 24/48 VDC flexible redundant power inputs
  • Supports 10 KB jumbo frames
  • Pluggable SFP transceiver port
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports Dual +18 ~ 55 VDC power input and 1 relay output
  • Supports operating temperatures from –40 ~ +75°C
  • DIN-Rail Mounting, Wall Mounting (optional)
Model: NSM-205GP
 
The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD).

Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports.
 
Technology
Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
IEEE 802.3af Power Over Ethernet
IEEE 802.3at Power Over Ethernet
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
Processing Type Store & forward, wire speed switching
MAC Addresses 8K
Memory Bandwidth 10 Gbps
Frame buffer memory 1 Mbit
Jumbo Frames 10K for Speed 1000M
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection
Fiber Port 1000BaseSFP slot/100BaseSFP slot
LED Indicators PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
DIP Switch 100BaseSFP/1000BaseSFP and PoE/PoE+ setting
Power Input
Redundant Input Range Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC)
Power Consumption 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports)
0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports)
Alarm Contact One relay output with current carrying capacity of 1A @ 30 VDC
Protection Power reverse polarity protection
Connector 6-Pin Removable Terminal Block (Power & Relay)
Mechanical
Chassis Metal with an IP30 ingress protection rating
Dimensions (W x L x H) 28 mm x 160 mm x 122 mm
Installation DIN-Rail or Wall Mounting (with optional kit)
Environment
Operating Temperature -40 °C ~ + 75 °C ( -40° F to 167° F )
Storage Temperature -40 °C ~ + 85 °C (-40 F to 185° F)
Ambient Relative Humidity 10 ~ 90% RH, non-condensing
 
NSM-205GP CR 4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports (RoHS)
 
DR-120-48 48 V/2.5 A, 120 W Single Output Industrial DIN Rail Power Supply
MDR-60-48 48 V/1.25 A, 60 W Single Output Industrial DIN Rail Power Supply
DR-120-24 24V/5 A, 120 W Single Output Industrial DIN Rail Power Supply
SDR-240-24 24 V/10 A, 240 W Single Output Industrial DIN Rail Power Supply with PFC Function
SFP-1G85M-SX Multi-mode 850 nm, 0.5 km SFP module
SFP-1G13M-SX2 Multi-mode 1310 nm, 2 km SFP module
SFP-1G13S-LX Single-mode 1310 nm, 10 km SFP module
SFP-1G13S-LX20 Single-mode 1310 nm, 20 km SFP module
SFP-1G13S-LHX Single-mode 1310 nm, 40 km SFP module
SFP-1G15S-XD Single-mode 1550 nm, 60 km SFP module
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player