home > product> solutions > industrial ethernet switch & fiber switch > Selection Guide > NSM-205G-1SFP
 
NSM-205G-1SFP
4+1G Combo Port Gigabit Unmanaged Industrial Ethernet Switch
 
 
 ~ NEW ~
Model: NSM-205G-1SFP
 
  • Full Gigabit Ethernet ports
  • Supports 10 KB jumbo frames
  • Pluggable SFP transceiver port
  • Supports Auto Negotiation and Auto MDI/MDI-X
  • Supports Dual +12 ~ 48 VDC power input and 1 relay output
  • Supports operating temperatures from –40 ~ +75°C
  • DIN-Rail Mounting, Wall Mounting (optional)
 
The NSM-205G-1SFP is 4 Port 10/100/1000 Base copper and 1 Gigabit fiber optic/copper combo port Ethernet Switch, Supports Auto Negotiation, Auto MDI/MDI-X, high-speed(1Gbps) and high-distance transmissions. Apart from this, NSM-205G-1SFP supports dual power and provides +12 VDC ~ +48 VDC power range to fit all the common power standards found in industrial automation, without external power converters.
 
Technology
Standards IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow Control
Processing Type Store & forward, wire speed switching
MAC Addresses 8K
Memory Bandwidth 10 Gbps
Frame Buffer Memory 1 Mbit
Jumbo Frames 10K for Speed 1000M
Flow Control IEEE802.3x flow control, back pressure flow control
Interface
RJ-45 Ports 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection
Fiber Ports 1000 BaseSFP slot/100 BaseSFP slot
LED Indicators PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected
Ethernet Isolation 1500 Vrms 1 minute
DIP Switch 100 BaseSFP/1000 BaseSFP setting
Power Input
Redundant Input Range +12 VDC ~ +48 VDC (Non-isolation)
Power Consumption 0.15A @ 24VDC
Alarm Contact One relay output with current carrying capacity of 1A @ 30 VDC
Protection Power reverse polarity protection
Connector 6-Pin Removable Terminal Block (Power & Relay)
Mechanical
Casing Metal with an IP30 ingress protection rating
Dimensions (W x L x H) 33 mm x 131 mm x 101 mm
Installation DIN-Rail or Wall Mounting (with optional kit)
Environmental
Operating Temperature -40 °C ~ + 75 °C ( -40° F to 167° F )
Storage Temperature -40 °C ~ + 85 °C (-40 F to 185° F)
Ambient Relative Humidity 10 ~ 90% RH, non-condensing
 
NSM-205G-1SFP CR 4+1G Combo Port Gigabit Unmanaged Industrial Ethernet Switch (RoHS)
 
DR-120-24 24 V/5 A, 120 W Single Output Industrial DIN Rail Power Supply
SDR-240-24 24 V/10 A, 240 W Single Output Industrial DIN Rail Power Supply with PFC Function
 
TOP | HOME
 

oӭWeݭns Adobe Flash PlayerC

o Adobe Flash Player