Technology |
Standards |
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow Control
Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity |
Processing Type |
Store & forward, wire speed switching |
MAC Addresses |
8K |
Packet buffer memory |
512KByte |
Jumbo Frames |
9216 Byte |
Flow Control |
IEEE802.3x flow control, back pressure flow control |
Interface |
RJ-45 Ports |
10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection |
LED Indicators |
PWR1, PWR2, FAULT, Link, Act |
Ethernet Isolation |
1500 Vrms 1 minute |
DIP Switch |
Ports loss link alarm mask |
Console Port |
Debugging, Monitoring, Setting |
Power Input |
Redundant Input Range |
Flexible input +24/+48 VDC Nominal. ( +12to +48 VDC) |
Power Consumption |
0.16A @ 48VDC Idle without loading; 0.2A @ 48VDC with full loading (0.12 W per ports)
0.31A @ 24VDC idle without loading; 0.39A @ 24VDC with full loading (0.12 W per ports) |
Alarm Contact |
One relay output with current carrying capacity of 1A @ 30 VDC |
Protection |
Power reverse polarity protection |
Connector |
6-Pin Removable Terminal Block (Power & Relay) |
Mechanical |
Chassis |
Metal with an IP30 ingress protection rating |
Dimensions (W x L x H) |
51 mm x 154 mm x 118 mm |
Installation |
DIN-Rail or Wall Mounting (with optional kit) |
Environmental |
Operating Temperature |
-40 °C to + 75 °C (-40 °F to 167 °F) |
Storage Temperature |
-40 °C to + 85 °C (-40 °F to 185 °F) |
Ambient Relative Humidity |
10 ~ 90% RH, non-condensing |