NS-108

~Phased out~

Model: NS-108

NS-108 Unmanaged Industrial Ethernet Switch Hub



Comparison table of NSM-108 vs NS-108

Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, and IEEE 802.3x flow control standards
Provides 8 10/100Mbps switched ports
Each port supports both 10/100Mbps speed auto-negotiation and auto-sensing
Each port auto detect MDI/MDI-X (UP-Link/TX)
Full/half duplex operation for each port
Supports 1K MAC addresses
Store-and-forward architecture
Non-blocking switching
Supports full-duplex flow control (IEEE 802.3x)
Back-pressure flow control in half duplex mode
Compact design with small footprint

Technology
Standards	IEEE802.3, 802.3u, 802.3x
Processing Type	Store & forward wire speed switching - no delays
MAC Addresses	1024
Memory Bandwidth	2 Gbps
Flow Control	IEEE802.3x flow control, back pressure flow control
Interface
RJ45 ports	10/100BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDIX connection
LED Indicators	Power, 10/100M, Link/Act
Ethernet Isolation	1500 Vrms 1 minute
Frame Ground for EMS Protection	Yes
Cable	Ethernet : 2-pair UTP/STP Cat.3,4,5, EIA/TIA-568 100-ohm
Cable	Fast Ethernet : 2-pair UTP/STP Cat. 5, EIA/TIA-568 100-ohm
Power
Input Voltage Range	+10 ~ +30VDC (Non-isolation)
Power consumption	0.24A@24VDC, +/- 5% arrowed with 10M Full duplex.
Protection	Power reverse polarity protection
Frame Ground for EMS Protection	Yes
Connection	5-Pin Removable Terminal Block
Mechanical
Case	Metal
Environmental rating	IP20
Dimensions	72 x 160 x 125 mm (W x H x D)
Installation	DIN rail mount
Environmental
Operating Temperature	0 ~ +60°C
Storage Temperature	-10 ~ +70°C
Ambient Relative Humidity	10% to 90% non-condensing

NS-108	Unmanaged Industrial Ethernet Switch
NSM-108 CR	Unmanaged 8-Port Industrial 10/100 Base-T Ethernet Switch(RoHS)