~ Phased out ~
 
 
 
   
Model:NC-200TF Series
NC-200TF Series
100 Base-T to 100 Base-FX Media Converter
     
     
       
       
     
 

Introduction
The NC-200TF series consists of two models of media converters: NC-200TFT,NC-200TFC. These converters are designed to convert 100 Base-T to /from 100 Base-T to/from 100 Base-FX media type. The NC-200TF series supports three fiber media types: multimode ST and SC connectors respectively. All three models support convenient connection to either a straight-through or a cross-over cable on the UTP end. The NC-200TF series converters are cost effective and easy solutions for use in a mixed cabling environment or extending the network span to include a fiber optic backbone.

 
   
     
 

Features

  • Complies with 802.3 100Base-T and 100 Base-FX standards
  • Provides media conversion from UTP to Fiber Optic media types
  • Extends network span up to 2km(multimode fiber)
  • Provides a push button to set crossover function for the TP port
  • Interoperable with other 100Base media converters
  • Provides LEDs for easy network monitoring
  • Supports a variety of fiber optic connectors including duplex multimode ST, SC
 
   
     
 

Specifications

Standard IEEE-802.3 Ethernet 100 Base-T and 100 Base-FX
Fiber Port
Fiber Cable
MultiMode ST , MultiMode SC ,
MultiMode 850nm 62.5/125£gm fiber cable(max.distance:2km)
TP Port
Cable
Shielded RJ-45 jack
Cat.5 UTP cable(100m max.)
LEDs -Power status
-Link and receive status for TP port
-Link and receive status for fiber port
Environment Temperature: 0¢XC to 50¢XC
Relative Humidity : 10% to 90% non-condensiong
Dimension 150mm x 26mm x 125mm
Power DC10~30V 8W
 
   
     
 

Connector Type

 
SC type
ST type
   
     
 

Ordering Information

Model
Description
Fiber Mode
Connector
Power input
 NC-200TFT  100M Fiber Optic to 100M RJ-45 Connector
MultiMode
ST
DC10~30V
 NC-200TFC  100MFiber Optic to 100M RJ-45 Connector
MultiMode
SC
DC10~30V
 
   
       
 
Copyright©1983-2004 ICP DAS Co., Ltd. All Rights Reserved