Model: PETL-7060
PETL-7060
Ethernet module with PoE and Power Relay Output/Digital Input
 
       
     
 
 
 
Providing various digital I/O functions, the PETL-7000 series is an IP-based Ethernet I/O monitoring and control module. The module can be remotely controlled through a 10/100 M Ethernet network by using Modbus TCP/UDP protocol. Modbus has become a de facto standard communications protocol in industry, and is now the most commonly available means of connecting industrial electronic devices. This makes the PETL-7000 series perfect integration with the HMI, SCADA, PLC and other software systems.

The functionality of the PETL-7000 series is almost the same as the PET-7000 series. The PETL-7000 series Ethernet I/O modules support various I/O types, like photo-isolated digital input, relay contact, PhotoMOS relay, and open-collector output. The module can be used to create DI to DO pair-connect through the Ethernet. Once the configuration is completed, the PETL-7000 series module can poll the status of the local DI channels and then use the Modbus/TCP protocol to continuously write to a remote DO device in the background.

The PETL-7000 series provides dual watchdog: CPU watchdog and host watchdog. The CPU watchdog automatically resets it-self when the built-in firmware runs abnormally. The host watchdog monitors the host controller (PC or PLC), and the output of the module can go to predefined state (safe value) when the host fails.

It is equipped with two removable terminal block connectors for easy wiring, and features a powerful 32-bit ARM MCU to handle efficient network trafficking. The PETL-7000 series offers true IEEE 802.3af-compliant (classification, Class 1) Power over Ethernet (PoE) using a standard category 5 Ethernet cable to receive power from a PoE switch like the NS-205PSE. When there is no PoE switch on site, the PETL-7000 series accepts power input from DC adapter.
 
     
  back  
   
 
 
 
  • Cost-effective Ethernet I/O modules (Modbus TCP/UDP slave)
  • Contains a 32-bit MCU that efficiently handles network traffic
  • 10/100 Base-TX Ethernet, RJ-45 x1 (Auto-negotiating, Auto MDI/MDIX, LED Indicator)
  • Includes redundant power inputs: PoE (IEEE 802.3af, Class 1) and DC input
  • Supports TCP, UDP, HTTP, DHCP, BOOTP and TFTP protocols
  • Supports UDP responder for device discovery
  • Supports web configuration and firmware update via Ethernet
  • Various digital input and output types
  • Supports latched DI and 32-bit high-speed counter functions
  • Supports I/O pair-connection through the Ethernet
  • Dual-watchdog with power-on and safe value
  • Easy DIN-Rail mounting
  • RoHS compliant, no Halogen
  • Low power consumption (about 1.7 W only)
 
     
  back  
   
 
 
 
  • Factory , Building and Machine Automation
  • Remote Maintenance
  • Testing Equipment
 
     
  back  
   
 
 
 
System
CPU 32-bit ARM
Dual Watchdog Yes
Communication
Ethernet Port 10/100 Base-TX, 8-Pin RJ-45 x1,
(Auto-negotiating, Auto-MDI/MDIX, LED indicator)
PoE (IEEE 802.3af, Class 1)
LED Display
PoE PoE indicator
L1 Run indicator
L2 Link/Act indicator
L3 10/100 M indicator
Mechanical
Dimensions 123 mm x 72 mm x 35 mm
Installation DIN-Rail or Wall mounting
Environment
Operating Temperature -25 ¢XC ~ +75 ¢XC
Storage Temperature -30 ¢XC ~ +80 ¢XC
Humidity 10 ~ 90 % RH, non-condensing
Power Requirements
Power Input PoE: IEEE 802.3af, Class 1
Terminal block: +12 ~ 48 VDC (non-regulated)
Power Consumption 0.06 A @ 24 VDC Max
 
     
  back  
   
 
 
 
Digital Input
Input Channels 6
Input Type (Device) Wet Contact (Sink, Source)
On Voltage Level -+10 VDC ~ +50 VDC
Off Voltage Level +4 VDC max.
Input Impedance 10 k Ohm
Counters Max. Count: 4,294,967,285 (32 bits)
Max. Input Frequency: 3.5 kHz (without filter)
Min. Pulse Width: 0.15 ms
Frequency Measurement 1 ~ 3.5 kHz in Mode ¡§1000 ms¡§, (+/- 1 Hz error)
10 ~ 3.5 kHz in Mode ¡§100 ms¡¨, (+/- 10 Hz error)
0.01 ~ 1 Hz in Mode ¡§Single-pulse¡¨ , (+/- 0.01 Hz error)
Overvoltage Protection +70 VDC
Isolation 3750 Vrms
Digital Output
Output Channels 6
Output Type (Module) Power Relay, Form A (SPST N.O.)
Output Voltage Range 250 VAC/30 VDC
Max. Load Current 5.0 A/channel at 25 ¢XC
Operate Time 6 ms
Release Time 3 ms
PWM 100Hz max
The unit of duty cycle is 1 ms, and the resolution is about 5 ms.(5~65535 ms)
Electrical Life
(Resistive load)
VED 5 A 250 VAC 30,000 ops (10 ops/minute) at 75 ¢XC
5 A 30 VDC 70,000 ops (10 ops/minute) at 75 ¢XC
UL 5 A 250 VAC/30 VDC 6,000 ops
3 A 250 VAC/30 VDC 100,000 ops
Mechanical Life 20,000,000 ops. At no load (300 ops./ minute)
Output Isolation 3750 Vrms
 
   
     
  back  
     
 
 
 
PETL-7060 CR     Ethernet module with PoE, 6-ch isolated DI and 6-ch form-A power relay (RoHS)
 
     
  back  
     
 
 
 
NS-205 CR     Unmanaged 5-Port Industrial Ethernet Switch (RoHS)
NS-205PSE CR     Unmanaged Ethernet Switch with 4 PoE Ports and 1 RJ-45 Uplink (RoHS)
MDR-60-48 CR     48 V/1.25 A, 60 W Power Supply with DIN-Rail
 
     
  back  
     
 
 
 
PETL7000/tET/tPET Series Main Page
 
     
   
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved