~NEW~  
 
 
 
Model: I-7088
I-7088
8-Channel PWM Output and 8-Channel High Speed Counter Module
 
     
 
     
 
 
 
I-7088 has 8 PWM output channels and 8 counter inputs. It can be used to develop powerful and cost effective analog control system. PWM (Pulse width modulation) is a powerful technique for controlling analog circuits. It uses digital outputs to generate a waveform with variant duty cycle and frequency to control analog circuits. It can be used to Controlling the position/speed of motors, Dimming the brightness of lamps, Controlling the speed of fans¡K etc.
 
     
  back  
     
 
 
 
  • Automatic generation of PWM outputs by hardware, without software intervention.
  • 10Hz ~ 500KHz PWM output frequency with 0.1%~99.9% duty cycle
  • Software and hardware trigger mode for PWM output
  • Individual and synchronous PWM output
    Using software trigger mode, you can set configuration for all PWM channels then trigger them one by one or all of them at the same time.
  • Burst mode PWM operation for standby
  • DI channel can be configured as simple digital input channel or hardware trigger source of the PWM output.
 
     
  back  
     
 
 
 
  • Controlling the position/speed of motors
  • Dimming the brightness of lamps
  • Controlling the speed of fans
 
     
  back  
     
 
 
 
PWM Output
Channels 8
Type TTL, Isolated
Max. Frequency 1Hz~500KHz
Duty Cycle 0.1%~99.9%
PWM Mode Burst mode, Continuous mode
Burst mode counter 1~65535 counts
Trigger Start Hardware or Software
ESD Protection (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point
Isolation 2500 VDC
Digital Input
Channels 8
Type Sink, Isolated
ON Voltage Level +2.4V~+5V
OFF Voltage Level +1V Max.
Max. Frequency 1MHz
Max. Counts 32-bits (4,294,967,295)
Built-in Virtual Battery Backup for Counter Value Yes
ESD Protection (IEC 61000-4-2) 4 kV Contact for each terminal and 8 kV Air for random point
Isolation 2500 VDC
Interface
Interface RS-485
Format N, 8, 1 (details)
Baud Rate 1200 ~ 115200bps
Power
Input Voltage Range 10 ~ 30 VDC
Power Consumption 2.4 W (max.)
Power reverse polarity protection Yes
+/- 4 kV ESD , +/- 4 kV EFT and +/- 3 kV Surge Protection Yes
Environment
Operating Temperature -25 ~ 75¢XC
Storage Temperature -40 ~ 85¢XC
Humidity 5 ~ 95%, non-condensing
 
     
  back  
     
 
 
 
I-7088 CR    8-Channel PWM Output and 8-Channel High Speed Counter Module (RoHS)
 
     
  back  
     
 
 
 
Converters    USB, RS-232, Fiber Optical to RS-485 Converters and Repeaters
Power Supply    24 VDC power supply
Relay Module    External relay modules for I-7000 DO module
Learning Kit    Learning kit
Application Books    Application books designed with our products
Data Logger Software    User friendly data logger software (free)
 
     
  back  
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved