Model: I-8410
Model: I-8810
Model: I-8410-G
Model: I-8810-G

  I-8410/ I-8810
  I-8410-G/ I-8810-G

      Embedded Serial I/O Unit

   
 

 
 
 
     
 


     The I-8410 and I-8810 are embedded serial I/O units using DCON Protocol Firmware.ICPDAS provides various I/O modules, such as analog input/output, digital input/output and counter/frequcncy modules, which can be used in remote data acquisition and control applications for environment monitoring, power management and factory automation, etc .

 
 

The CPU is a 8-bit 80188 (40MHz). Apart from the original functions (input, output, power on value, safe value, high limit value, low limit value) of the I/O module, the firmware provides additional functions to allow I/O modules in different slots to be combined together. For example, if the channel value of an AI module is above a predefined high limit value, or below a predefined low limit value, the information can be immediately passed to another DO module to trigger alarm or light.

Various software development kits (SDK) and demos are provided, such as DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC server, etc. The I/O modules can be easily added to the I-8410/I-8810 and can be quickly integrated into an existing system.

 
     
  back  
     
 
 
     
 
  Supports the RS-232 or RS-485 communication interface.
  Supports DCON communication protocol
  Dual Bus designed to supports I-8K and I-87K series I/O
  modules, such as DI/DO, AI/AO, Counter/Frequency
  modules
  Compact I/O Expansion slot allows the quick installation of
  various 8K and 87K I/O modules
  I/O configurable using DCON Utility
  Firmware updated via the RS-232 port
  Firmware auto scan AI modules and can map alarm to DO
  modules on the slots.
  Dual Watch Dog mechanism enable I-8000 system can work
  reliablely under harsh environment.

  Ventilated housing designed to operate between ¡V25¢XC to
  +75¢XC

  Using DIN rail clips or Screw poles around the corners
  allows the control unit to be easily mounted on the control
  box
  Frame Ground provides a path for bypassing ESD, allowing
  enhanced static protection (ESD) capability and ensures that
  the module is more reliable.


  Various SDKs provided ( free )
  DLL, ActiveX, Labview driver, Indusoft driver, Linux driver, OPC
  server, etc
 
     
  back  
     
 
 
 
CPU module
CPU 80188 or compatible (8-bit and 40MHz)
SRAM 256KBytes
Flash 256KBytes
EEPROM 2KBytes
NVRAM -
RTC (real time clock) -
Hardware Serial Number -
Built-in Watchdog Timer Yes
Communicate Interface
COM 0
Internal communication with the 87K modules
COM 1 RS-232 (to update firmware)
COM 2
RS-485
COM 3
RS-232/RS-485
COM 4 -
Ethernet Port -
SMMI
5 - Digit LED Display Yes
3 - Programmable LED Indicators Yes
4 - Push Buttons Yes
I/O expansion slots
8410 4 Slots
8810 8 Slots
Dimensions
8410 230mm x 110mm x 75.5mm
8810 354mm x 110mm x 75.5mm
Operating Environment
Operating Temperature ¡V25¢XC to +75¢XC
Storage Temperature ¡V30¢XC to +85¢XC
Humidity 5 to 95% RH, non-condensing
Power
Protection Power reverse polarity protection
3KV power isolation -
Power requirement 10 ~ 30 V/DC
Power supply 20W
Power consumption I-8410 : 3.9 W
I-8810 : 5.1 W
 
     
  back  
     
 
 
 
I-8410     I-8410 Embedded I/O unit
I-8810     I-8810 Embedded I/O unit
I-8410-G     I-8410 Embedded I/O unit with gray color
I-8810-G     I-8810 Embedded I/O unit with gray color
 
     
  back  
     
 
 
 
KA-52F    AC100~250V input, DC 24V/1A output, flat type power supply
DIN-KA52F    KA-52F with DIN-Rail mount
DP-665    AC 85 ~ 270 V input, DC 24V/1.7A and 5V/0.5A output power supply
DP-660    24V/1.7A 5V/0.5A Power Supply
DP-1200    24V/5A Power Supply
 
     
  back  
Copyright© ICP DAS Co., Ltd. All Rights Reserved