ICP DAS PROFI-5017

PROFIBUS

PROFI-5017

Applications

Features

Hardware Specifications

Ordering Information

PROFIBUS Lists

Introduction Page

PROFI-5017
~ Available soon ~
PROFIBUS Remote I/O Module

The PROFI-5017 is specially designed for the slave device of PROFIBUS DP protocol. It supports up to 8-channel isolated analog voltage input with 2500Vrms field to logic isolation. Users can easily to choose and configure it by using the GSD file in any PROFIBUS Configurator.

Industrial Automation
Factory Automation
Process Automation
Etc…

back

Protocol & Hierarchy	DP-V0 Slave
Supports Transmission Rate (kbps)	9.6, 19.2, 45.45, 93.75, 187.5, 500, 1500, 3000, 6000, 12000
Transmission Rate Setting	detected automatically
Address Setting	Address 0~126 set by rotary switches or SSA Telegram
Indicators	PWR LED, RUN LED, ERR LED
I/O modules Configuration	Configured by GSD file
Network Isolation Protection	High Speed iCoupler
DC Isolation Protection	3000 VDC on PROFIBUS side
4KV ESD Protection	Contact for each terminal

back

Hardware
ESD Protection	4 kV class A
PROFIBUS Interface
Controller	Siemens SPC3
Transceiver	ADI ADM2486
Connector	9-pin female D-Sub
Baud Rate (bps)	9.6 k, 19.2 k, 45.45 k, 93.75 k, 187.5 k, 500 k, 1.5 M, 3 M, 6 M, 12 M
Transmission Distance (m)	Depend on baud rate (for example, max. 1200 m at 9.6 kbps )
Isolation	3000 VDC for DC-to-DC, 2500 Vrms for bus-to-logic
Protocol	DP-V0
LED
Round LED	PWR LED, RUN LED, ERR LED
Power
Power supply	Unregulated +10 ~ +40 VDC
Protection	Reverse polarity protection, Over-voltage brown-out protection
Power Consumption	3 W
I/O
Analog input	8 channel differential voltage input Isolation Voltage:2500Vrms
Mechanism
Installation	DIN-Rail
Dimensions	91 mm x 128 mm x 52 mm (W x L x H)
Environment
Operating Temp.	-25 ~ 75℃
Storage Temp.	-30 ~ 85℃
Humidity	5 ~ 95% RH, non-condens

back

PROFI-5017 CR

PROFIBUS Remote I/O Module(8-Ch Isolated Analog Voltage Input)

back