~Will be phased out~
 
~NEW~
 
Model: VXC-142i/VXC-142 Model: VXC-142iU/VXC-142U
VXC-142/VXC-142i
VXC-142iU/VXC-142U

Serial Communication Board with 2 RS-422/485 ports
     
 
     
 
 
 
The VXC-142 series card provides two RS-422/RS-485 serial ports. Each port can be configured as either RS-485 for half-duplex or RS-422 for full-duplex communication. It supports for speed up to 115200 bps and supports full-duplex communication.

Users may specify a COM port number manually by setting dip switch, or let the driver choose an available number automatically. The driver provides a maximum of 128 KB software FIFO for each COM port under Windows. It's practical for large file transmission.

In harsh industrial environments, the on board ESD protection component diverts the potentially damaging charge away from sensitive circuit and protects the computer and equipment from being damaged by high potential voltage.

The serial communication card are designed for use with intelligent devices like bar code reader, serial printers, intelligent sensors, instrumentation equipment, computers and almost any device with an RS-422/RS-485 port.
 
   
  back  
     
 
 
 
  • Provides 2 RS-422/485 ports
  • Built-in COM-Selector
  • +/-4 kV ESD Protection
  • 128 KB Software Buffer (max.) for Each COM Port Under Windows
  • Windows NT/2K/XP/2003 Driver Supported
  • 2500 VDC Isolation for VXC-142iU
  • 3 kV Isolated ports for VXC-142i
  • Short Card Design for VXC-142(i)U
  • 128-byte Hardware FIFO for Each Port for VXC-142(i)U
  • Supports 3.3 V/5 V PCI bus, Plug and Play for VXC-142(i)U
  • LED diagnostic indicators for VXC-142(i)
  • Supports 5 V PCI bus, Plug and Play for VXC-142(i)
  • 16 bytes hardware FIFO for each port for VXC-142(i)
 
   
  back  
     
 
 
 
  • Driver for Windows 2000
  • Driver for 32-bit Windows XP/2003/Vista and 32-bit Windows 7
 
   
  back  
     
 
 
 
  • Industrial Machinery
  • Building Automation
  • Restaurant Appliances
  • Laboratory Equipment & Research
  • Industrial Communication
 
   
  back  
     
 
 
 
Models VXC-142 VXC-142i VXC-142U VXC-142iU
Communication Port
COM1 ~ COM2 RS-422/485 The RS-422 and RS-485 cannot be used simultaneously
RS-422 TxD+, TxD-, RxD+, RxD-, RTS+, RTS-, CTS+, CTS-, GND
RS-485 Data+, Data-, GND
UART 16C550 compatible 16C950 compatible
Baud Rate 50 ~ 115200 bps
Data bit 5, 6, 7, 8
Stop bit 1, 1.5, 2
Parity None, Even, Odd, Mark, Space
FIFO Internal 16 bytes Internal 128 bytes
Isolated - 3000 Vrms - 2500 VDC
General
Bus Type PCI bus (v2.1), 5 V, 33 MHz, 32-bit,
Plug and Play mechanism
Universal PCI, 3.3 V and 5 V, 33 MHz, 32-bit, Plug and Play
COM-Selector Yes (8-bit DIP switch)
Connector 2 x Male DB-9
Power Consumption 105 mA @ 5 V 500 mA @ 5 V 100 mA @ 5 V 480 mA @ 5 V
Operating Temperature 0 ¢XC ~ +50 ¢XC
Storage Temperature -20 ¢XC ~ +70 ¢XC
Humidity 0 ~ 90% RH, non-condensing
Dimensions (L x W x D) 130 mm x 105 mm x 22 mm 140 mm x 95 mm x 22 mm 134 mm x 90 mm x 22 mm
 
   
  back  
     
 
 
 
Universal PCI Bus
VXC-142U CR Universal PCI Bus, Serial Communication Board with 2 RS-422/485 ports (RoHS)
VXC-142iU CR Universal PCI Bus, Serial Communication Board with 2 Isolated RS-422/485 ports (RoHS)
PCI Bus
VXC-142 PCI Bus, 2-port RS-422/485 Communication Board
VXC-142i PCI Bus, 2-port Isolated RS-422/485 Communication Board
VXC-142i CR PCI Bus, 2-port Isolated RS-422/485 Communication Board (RoHS)
 
   
  back  
     
 
 
 
CA-0910F 9-pin Female-Female D-sub Cable 1 M
DN-09-2F I/O Connector Block with DIN-Rail Mounting and two 9-pin Male Header. Includes CA-0910F x 2 (9-pin Female-Female D-sub Cable 1 M).
CA-090910 9-pin Female D-sub cable for RS-422 connector, 1 M
CA-PC09F 9-pin Female D-sub connector with plastic cover
CA-0915 9-pin Male-Female D-sub cable, 1.5 M
 
   
  back  
     
 
 
 
VXC Cards Main Page
 
   
  back  
     
Copyright© ICP DAS Co., Ltd. All Rights Reserved