The InstantWave 11Mbps Wireless Access Point provides interoperability, expandability, security, and manageability for top performance wireless networking in both single and multiple AP installations. Comprehensive SNMP-based management software gives professional level network management tools for easy wireless network management and monitoring.

The InstantWave 11Mbps Wireless Access Point fully complies with the IEEE 802.11b and Wi-Fi standards. With superior wireless technology and advanced features, the InstantWave 11Mbps Wireless Access Point is a reliable, high performance, cost effective wireless solution.

Industrial IEEE 802.11b Standard Compliant
Complies with the IEEE 802.11b DSSS (Direct Sequence Spread Spectrum) wireless standard and is fully compatible with Wi-Fi certified products, ensuring full product interoperability between vendors.

Superior Coverage and High Transmission Quality
InstantWave's advanced radio frequency technology gives outstanding performance at up to 11Mbps data transmission/reception speed:

• Advanced external dual diversity antenna for top quality transmission/reception
• Superior receiving sensitivity enhances weak data signal pickup at longer distances

Easy Installation
User-friendly Windows-based interface, setup wizard, and step-by-step instructions make the InstantWave 11Mbps Wireless Access Point fast and easy to install.

Detachable Antenna
The detachable antenna design provides the flexibility to connect a high-gain antenna for higher transmission quality over a wider coverage area, or in a radio frequency hostile environment.

Wireless Configuration
InstantWave's superior wireless technology eliminates the requirement to make a wired set up or configuration connection. Simply do it all from a wireless client!

Comprehensive Network Management Tools

• Supports SNMP for MIB I and MIB II over Ethernet in a Windows environment.
• Service Discovery:
  Auto IP Address Assignment Support: The NWH660 will automatically generate a new IP address should the DHCP server fail. - AP Discovery: Allows network administrators to easily locate all InstantWave APs for centralized management.
• Supports Site Survey:
  Helps evaluate and determine the best location in which to place the AP for the best performance.
• Protocol Filtering:
  Saves bandwidth and increases security by preventing the AP from transmitting unneeded protocols onto the wireless network.
• On-line Firmware Upgradeability:
  Allows AP firmware to be upgraded from a remote station without stopping the network.
• Trap Server:
  With auto-notification of abnormal operation, network administrators can easily monitor the network operating condition and take preventive action in order to increase network uptime.
• Windows-based Configuration:
  Allows users to easily configure the AP in a Windows environment.
• DHCP Client Support:
  Automatically obtains a new IP address from a DHCP server using the Dynamic Host Configuration Protocol.
• Batch Configuration:
  Automatically propagates configuration settings to a group of APs on the same subnet.

• Standards Compliance：
  IEEE 802.11b, Wi-Fi compliant
• Radio Frequency Type：
  Direct Sequence Spread Spectrum (DSSS)
• Frequency Band：
  2.4GHz
• Transmission Rate：
  Up to 300m (984ft) outdoors (depends on the interference conditions and environment)
  Up to 100m (328ft) indoors (depends on the interference conditions and environment)
• Access Point Interfaces：
  10Base-T: RJ-45
  RS-232: D-SUB 9 pin
  Radio Wave: Antenna - Reverse-SMA
• Antenna Type：
  Dual dipole diversity
• Security：
  40-bit/128-bit WEP encryption; Secure SSID; User Authentication (EAP-like); MAC Access Control; Administrative Access Control; Unauthorized wireless Access Alert
• Software Support：
  SNMP for MIB I and MIB II; Windows-based network management tools; Access Control; Protocol filtering; Trap Management; Self-Diagnostic Test; Upgradeable Firmware; Auto IP Assignment; AP Discovery; Seamless Roaming; DHCP Client- Batch Configuration
• Operating Environment：
  Operating Temperature: 0 ~ 55¢C (32 ~ 131¢K)
  Storage Temperature: -30 ~ 70¢C (-22 ~ 158¢K)
  Humidity: Maximum 85% at 40¢C (104¢K) non-condensing
• Dimensions：
  220 x 145 x 33mm (8.66 x 5.71 x 1.30in.)
• Power：
  DC 5.1 Volt + 5%; 2A (Max.); AC adapter AC 100V ~ 240V; 1.0A (Typical)
  Power Consumption: 5.1Volt. 1.0A (Typical)
• Regulatory Approval：
  FCC Part 15 B (US); CE; TELEC
• OS Support：
  Windows 95/98/Me/NT4.0/2000/XP
• Warranty：
  One year limited