Home > Product > Solutions > Machine Automation > Introduction > Selection Guide > Daughter Boards
 
 
  DN-8368 Series
Photo-isolated terminal board for ICP DAS 6-axis stepper/servo controller
   
  ∼NEW∼
 
     
  DN-8368GB
DN-8368GB is for general purpose usage
datasheet
     
  DN-8368GB  
     
     
  DN-8368MB
DN-8368MB is for Mitsubishi J2S Servo Amplifier
datasheet
     
  DN-8368MB  
     
   
   
The DN-8368 series is a daughter-board that is designed for ICP DAS’s 6-axis motion controllers, such as PISO-PS600, PISO-VS600 and PMDK. Each DN-8368xB supports 3-axis and two DN-8368xB are required to support 6-axis. The DN-8368GB is designed for general purpose usage while the DN-8368MB is designed to be easily connected with Mitsubishi MINAS-J2S series servo amplifier. It is not only a screw terminal board for easy connection of signals; it also provides on-board isolating circuitry to protect the controllers. Interface signals are divided into three groups. Each group corresponds to a single axis and contains the necessary pulse output command lines, encoder feedback lines, mechanical switch inputs (Home, near home, limit -switches) and some servo input/output interfaces (Srv_On, ERC, ALM_RST, RDY, Alarm, INP). Terminal connectors are used for easy wiring purpose. Users can interchange connectors to interchange each axial definition without laborious rewiring. This board also contains on-board power module which provides different voltages for other on-board circuitry.
 
 
 

  • High Speed Photo-coupling Isolated.
  • Supporting Pulse Command Type Step Motors or Servo Motors.
  • Providing Power LED and Other Status LEDs (Home, Limit Switches, …)
 
 
 
Power
Nominal Load 0.5 A /24 VDC
Input Power 24 VDC, 0.5 A
Power Consumption 12 W (24 VDC)
Environment
Operating Temperature -25 ~ +75 °C
Storage Temperature -30 ~ +85 °C
Operating Humidity 20 ~ 80% RH, Non-condensing
Storage Humidity 10 ~ 90% RH, Non-condensing
Dimensions
162 mm X 107 mm
 
 
 

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player