| |
|
|
| |
|
|
| |
PISO-P32C32
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-collector output Board (Current Sinking, NPN type) |
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
The PISO-P32C32 has 32 channels of optically isolated digital inputs and 32 channels of optically isolated digital outputs, arranged into four isolated banks. Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated input channels 0-15 are designed into group A and channels 16-31 are designed into group B. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The PISO-P32C32 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector . Each D-Sub connector contains 16 input channels and 16 output channels. |
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- 32-channel optically isolated digital input
- 32-channel optically isolated digital output
- DC/DC converter built-in
- 3000V DC isolation voltage
- Four isolated bank
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Factory automation
- Product test
- Laboratory automation
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
|
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| Isolated Input |
|
|
|
3750V(Using external power); 3000V ( Using internal power)
|
|
|
|
3K (DC 24V, 7.67mA) for each channel
|
|
|
| Isolated Ouput |
|
|
|
|
|
|
| Power |
|
|
| Environmental |
Operating temperature |
0~60¢XC |
Storage temperature |
-20¢XC~70¢XC |
Humidity |
0 to 90% non-condensing |
| Dimensions |
Dimensions |
180mm x 105mm |
|
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| PISO-P32C32 |
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-collector output Board (Current Sinking)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors. |
| PISO-P32C32 CR |
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-collector output Board (Current Sinking) (RoHS)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors. |
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| CA-4737B |
40-pin flat & D-sub 37-pin Female cable 24cm. |
| DB-16P16R |
16-channel input terminal and 16-channel relay output board
Include : CA-3710D Male- Male D-sub Cable 1.0M |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
DN-37 |
DIN Rail Mounting 37-pin Connector |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
