| |
|
|
| |
|
|
| |
PISO-P32A32
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-Collector Output Board (Current Sourcing, PNP type) |
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
TThe PISO-P32A32 has 32 channels of optically isolated digital input and 32 channels of optically isolated digital output, arranged into four isolated banks. Each input channel use a photo-coupler input which allows either internal isolated power supply or external power selected by jumper. Each digital output offers a PNP transistor and integral suppression diode for inductive load. Isolated input channels 0-15 are designed into group A and channels 16-31 are designed into group B. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or internal power. The power supply of the output port should use the external power. This interface board is easily installed in any PC. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The PISO-P32A32 has one 37-pin D-Sub connector and one 40-pin male header. The 40-pin to DB-37 flat-cable is used to fix with the case. The user can connect the digital signal through the second D-Sub connector. Each D-Sub connector contains 16 input channels and 16 output channels |
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- 32-channel optically isolated digital input
- 32-channel optically isolated digital output
- DC/DC converter built-in
- 3000V DC isolation voltage
- Four isolated bank
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Factory automation
- Product test
- Laboratory automation
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- LabVIEW toolkit for Windows
|
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| Isolated Input |
|
|
|
3750V(Using external power); 3000V ( Using internal power)
|
|
|
|
|
|
|
| Isolated Ouput |
|
|
|
|
|
|
| Power |
|
|
| Environmental |
Operating temperature |
0~60¢XC |
Storage temperature |
-20¢XC~70¢XC |
Humidity |
0 to 90% non-condensing |
| Dimensions |
Dimensions |
180mm x 105mm |
|
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| PISO-P32A32 |
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-Collector Output Board (Current Sourcing)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors. |
| PISO-P32A32 CR |
32-channel Optically Isolated Digital Input and 32-channel Optically Isolated Digital Open-Collector Output Board (Current Sourcing) (RoHS)
Includes one CA-4037B cable and two CA-4002 D-Sub connectors. |
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| CA-4002 |
37-pin Male D-sub connector with plastic cover. |
| CA-4737B |
40-pin flat & D-sub 37-pin Female cable 24cm. |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
DN-37 |
DIN Rail Mounting 37-pin Connector |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
