PISO-DA2U

~NEW~

PISO-DA2U
Universal PCI, 2-Channel Isolated Analog Output Board

Model: PISO-DA2U

The PISO-DA2U has 2 analog output channels with high-voltage isolation protection and provides universal PCI interface (3.3 V/5 V). The PISO-DA2U is fully compatible with the PISO-DA2, and users can replace the PISO-DA2 by the PISO-DA2U directly without software/driver modification.

The built-in high-quality isolation components on the PISO-DA2U make it featuring 3750 VDC bus-typed and channel-channel isolation, and offer durable abilities. For the PISO-DA2U, the voltage output ranges are +/-10 V, +/-5 V, 0~+10 V and 0~+5 V and the current output ranges are 0 ~ 20 mA and 4 ~ 20 mA. In addition, the PISO-DA2U also features the following advantages by ICP DAS's innovation:

1. Accurate and easy-to-use calibration:
ICP DAS provides the software calibration instead of the manual calibration so that no jumpers and trim-pots are required anymore. The calibration data can be saved in the EEPROM for long-term use.
2. Channel to channel configuration:
Each channel can be individually configured as voltage or current output with different output range.
3. Card ID:
ICP DAS provides the card ID function for PISO-DA2U. Users can set a card ID for each card so that when more than two boards are used in a computer at the same moment, users can still instantly recognize them one by one.

PISO-DA2U supports a wide range of operating systems like Linux, DOS, Windows 98, Windows 2000, Windows NT and Windows XP 32-Bit. Moreover, ICP DAS provides all the DLL and Active X for users, and sample programs covering from Turbo C++, Borland C++, Microsoft C++, Visual C++, Borland Delphi, Borland C++ Builder, Visual Basic, C#.NET, Visual Basic.NET and LabView are also provided for intuitive and fast learning!

back

Supports both +5 V and +3.3 V PCI bus for PISO-DA2U
Supports +5 V PCI bus for PISO-DA2
Two independent 12-bit analog output channels
3750 VDC bus and channels isolation protection
3000 VDC power isolation protection
Software calibration
Unipolar or bipolar output available from each converter
Two pacer timer interrupt source
Double-buffered D/A latch
The calibration data is fully stored in EEPROM

back

DOS Lib and TC/BC/MSC sample program (source codes included)
DLL and OCX SDK for Windows 98/NT/2000
DLL and OCX SDK for 32-bit and 64-bit Windows XP/2003/Vista/7
VB/VC/Delphi/BCB/VB.NET/C#.NET sample programs with source codes
LabVIEW toolkit for Windows
Driver for Linux

back

Model Name	PISO-DA2	PISO-DA2U
Analog Output
Isolation Voltage	3750 V (Bus Type, CH-to-CH)
Channels	2
Resolution	12-bit
Accuracy	0.015% of FSR ± 1/2 LSB @ 25 °C, ± 10 V
Output Range	Voltage:+/-10 V,+/-5 V,0 ~ 10 V,0 ~ 5 V Current: 0 ~ 20 mA, 4 ~ 20 mA
Output Driving	+/- 5 mA
Slew Rate	0.3 V/μs
Output Impedance	0.1 Ω max.
Operating Mode	Software
General
Bus Type	5 V PCI, 32-bit, 33 MHz	3.3 V / 5 V Universal PCI, 32-bit, 33 MHz
Data Bus	8-bit
Card ID	No	Yes(4-bit)
I/O Connector	Male DB9 x 2
Dimensions (L x W x D)	170 mm x 122 mm x 22 mm	189 mm x 98 mm x 22 mm
Power Consumption	1350 mA @ +5 V
Operating Temperature	0 ~ 60 °C
Storage Temperature	-20 ~ 70 °C
Humidity	5 ~ 85% RH, non-condensing

back

PISO-DA2U CR	Universal PCI, Isolated 12-bits analog output board Includes two CA-PC09M D-Sub connectors.
~~PISO-DA2~~	Isolated 12-bits analog output board Includes two CA-PC09M D-Sub connectors.
PISO-DA2U/S	PISO-DA2U with DB-8425 daughter board
~~PISO-DA2/S~~	~~PISO-DA2 with DB-8425 daughter board~~

back

CA-PC09M	9-pin Male D-sub connector with plastic cover.
DB-8425	provided for easy wire connection with the controlled device or equipment

back

I/O Card Main Page

back