| |
|
|
| |
|
|
| |
ISO-P64
64-channel Optically Isolated Digital Input |
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
The ISO-P64 has 64-channel isolated digital input board, arranged
into four isolated banks. Each input chanel use a photo-coupler
input which allows either internal power supply or external
power selected by jumper. Isolated input channels 0~15 are designed
into group A, channels 16~31 are designed into group B, Isolated
input channels 32~47 are designed into group A, channels 48~63
are designed into group B. The power supply of the input port
may use the external power or the the power from the PC side
using DC to DC converter. The board interface to field logic
signals, eliminating ground-loop problems and isolating the
host computer from damaging voltages. The ISO-P64 has one 37-pin
D-sub connector ans one 40-pin header. The 40-pin to D-sub 37
flat cable is used to fixed with the case. The user can connect
the digital signal through the second D-sub connector. Each
D-sub connector contains 16 inputs channel and 16 output channel.
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- 64-channel optically isolated digital input
- DC/DC converter build-in
- Four isolated bank
- 3000Vdc isolation voltage
- Interrupt handling
- Interrupt source : channel 0 and channel 16
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Factory Automation
- Product Test
- Laboratory Automation
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Toolkit for DOS
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
- Toolkit for Labview 95/98
- Toolkit for Labview NT
|
- Toolkit for Labview 2000/XP
- Toolkit for OCX 95/98
- Toolkit for OCX NT
- Toolkit for OCX 2000/XP
- Driver for LINUX
- Driver for DasyLab
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| Isolated Inputs |
Type |
Isolated Current input |
Isolation Voltage |
3750V (Using External Power) , 3000V (Using Internal Power) |
Input Voltage |
5V to 30V |
Input impedance |
3K ohm |
Input Current |
DC24V @ 7.67mA / Each channel |
Response time |
10Khz Max |
Power |
Power Requirements |
+5V @850mA max |
Environmental |
Operating temperature |
0~60¢XC |
Storage temperature |
-20~70¢XC |
Humidity |
0 to 90% non-condensing |
Dimensions |
Dimensions |
175 mm x 124 mm |
|
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| ISO-P64 |
Isolated 64-chanel digital Input Board
Includes one CA-4037W cable and two CA-4002 D-Sub connectors. |
| ISO-P64 CR |
Isolated 64-chanel digital Input Board (RoHS)
Includes one CA-4037W cable and two CA-4002 D-Sub connectors. |
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
| DN-37 |
DIN Rail Mounting 37-pin Connector |
| CA-4002 |
37-pin Male D-sub connector with plastic cover |
| CA-4037W |
40-pin flat & D-sub 37-pin Female cable 24cm. |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
