| |
|
|
| |
|
|
| |
ISO-730
32-channel Isolated Digital I/O Board |
|
|
|
|
|
|
|
| |
|
|
| |
|
|
| |
The ISO-730 has 32 optically isolated digital I/O and 32 TTL logic I/O channel. Each of the 16 isolated digital input channel accept voltage from 5V to 24Vdc and has a resistance of 1.2K onm. Every eight input channels use one external common ground. For example, channel 0-7 use EI.COM1 and channel 8-15 use EI-COM2. Each of the 16 isolated digital output channels equipped a darlington transistor. Every eight output channels use the common emitters. The power supplyof the output port should use the external power. The channels 0-7 use EO-COM1 and channel 8-15 use EO-COM2. This interface board is easy installed in any PC/AT/XT. The board interface to field logic signeds, eliminating ground loop problems and isolating the host computer from damaging voltages.
The ISO-730 has one 37-pin D-sub connector and four 20-pin header. It is fully compatible to PCL-730.
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- 16-channel optically isolated digital input
- 16-chanel Optically isolated open-collector output
- 16-channel TTL level digital input (Non-isolation)
- 16-channel TTL level digital output (Non-isolation)
- DC/DC converter build-in
- One 37-pin D-sub connector and Two sparate 20-pin header for isolated I/O
- Two 20-pin header for TTL digital I/O (Non-isolatiton)
- 2500Vdc isolation voltage
- Interrupt handling
- Interrupt source : channel 0 and channel 16
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Factory Automation
- Product Test
- Laboratory Automation
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
- Toolkit for Windows 95/98
- Toolkit for Windows NT
- Toolkit for Windows 2000/XP
|
- Toolkit for Labview 95/98
- Toolkit for Labview NT
- Toolkit for Labview 2000/XP
- Driver for DasyLab
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| Isolated Input |
Channels |
16 |
Type |
Isolated Current input |
Isolation Voltage |
2500V |
Input Voltage |
5V to 30V |
Input impedance |
1.2K ohm |
Response time |
10Khz Max |
Isolated Open-collector Output |
Channels |
16 |
Output voltage |
Open-collector 5 to 40Vdc |
Isolation voltage |
2,500Vdc |
Sink current |
200mA (Max.) |
Response time |
10Khz max. |
Non-Isolated Digital I/O |
Digital Input |
Channel |
16 |
Type |
TTL Level |
Input Voltage |
High : 2.0(min.) / Low :0.8 V(max.) |
Input Load |
High : 50mA max. @2.7V / Low: 40mA max.@0.5V |
Response Time |
30Khz max. |
Digital Output |
Channel |
16 |
Type |
TTL Level |
High : Source 0.4mA at 2.4V mon. / Low : sink 8 mA at 0.5V max. |
Interrupt Source |
Isolated Digital input channel 0 and 1 |
Non- isolated digital input channel 0 and 1 |
Power |
Power Requirements |
+5V @800mA max |
Environmental |
Operating temperature |
0~60¢XC |
Storage temperature |
-20~70¢XC |
Humidity |
0 to 90% non-condensing |
Dimensions |
Dimensions |
175 mm x 124 mm |
|
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| ISO-730 |
Isolated 32-chanel digital I/O Board
Includes one CA-4002 D-Sub connector. |
| ISO-730 CR |
Isolated 32-chanel digital I/O Board (RoHS)
Includes one CA-4002 D-Sub connector. |
|
|
|
|
| |
back |
|
|
|
|
| |
|
|
| |
|
|
| |
| DB-37 |
Directly connect signal to D-sub 37-pin connector |
| DN-37 |
DIN Rail Mounting 37-pin Connector |
| CA-4002 |
37-pin Male D-sub connector with plastic cover |
| DB-16R |
Iisolated Relay output Daughter board |
| DB-16P |
Isolated Digital input Daughter Board |
|
|
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
|
|
| |
back |
|
| |
|
|
