Home > Product > Solutions > Machine Automation > PC-based Solution > PC-based Motion Products List
Model: ENCODER300
ENCODER300
ISA Bus, 3-axis Encoder Interface Card
 
       
Link to chinese page
The ENCODER300 is a 3-axis quadrature encoder interface board for the IBM PC/AT bus compatibles. For each encoder, phase 0, phase 90 and index pulse inputs are provided. Inputs may be single ended (A,B,C) or differential (A+, A-, B+, B-, C+,C-). power and ground connections are provided for encoder use if needed. Inputs are conditioned by a four-stage digital filters. The maximum input rate in quadrature decode mode is 1 MHz. The conditioned input are applied to a 16-bit counter. The counter may be used for quadrature decoding, pulse-input and direction-input counting, or as a pulse input up/ down counter.
 
 
  • Accepts Inputs from Incremental or Quadrature Encoders
  • 3 Independent Axis
  • Max. Quadrature Input Frequency: 1 MHz
  • Counts per Encoder Cycle: X1, X2, X4 (Software selectable)
  • Encoder Input Modes: Quadrature , Up/Down , Pulse/Direction
Top
 
  • Toolkit for DOS
  • Toolkit for Windows 95/98
  • Toolkit for Windows NT
  • Toolkit for Windows 2000/XP
  • Toolkit for LabVIEW 2000/XP
  • Toolkit for LabVIEW NT
  • Toolkit for LabVIEW 95/98
  • Driver for LINUX
 
 
  • Encoder Type: Single-ended or differential
  • Logic Levels: TTL, CMOS compatible
  • Power Consumption: +5 V @ 500 mA
 
 
ENCODER300 ISA Bus, 3-axis Encoder Interface Card
Include: CA-PC25M (25-pin Male D-sub Connector with Plastic Cover)
 
 
I/O Connector Block with 25/9 pin D-sub Connector (DIN-Rail Mounting)
Top

這個頁面上的內容需要較新版本的 Adobe Flash Player。

取得 Adobe Flash Player