|
¡@
Functional Description
The PISO-P32C32
has 32 channels of optically isolated digital inputs and
32 channels of optically isolated digital outputs,
arranged into four isolated banks. Each input channel use
a photo-coupler input which allows either internal
isolated power supply or external power selected by
jumper. Each digital output offers a darlington
transistor and integral suppression diode for inductive
load. Isolated input channels 0-15 are designed into
group A and channels 16-31 are designed into group B.
Isolated output channels are designed into group C and
Group D. The power supply of the input port may use the
external power or the power from the PC side using DC/DC
converter. The power supply of the output port should use
the external power. This interface board is easily
installed in any PC. The board interface to field logic
signals, eliminating ground-loop problems and isolating
the host computer from damaging voltages. The PISO-P32C32
has one 37-pin D-Sub Connector and one 40-pin male header.
The 40-pin to DB-37 flat cable is used to fix with the
case. The user can connect the digital signal through the
second D-Sub connector . Each D-Sub connector
contains 16 input channels and 16 output channels.
¡@
Features
-
32-channel optically isolated digital input
-
32-channel optically isolated digital
output /open collector
-
DC/DC converter built-in
-
Four isolated bank.
-
3000V DC isolation voltage
|
¡@
General
Environmental
-
Operating temp.
: 0-50¢XC
-
Storage temp.
: -20 to 70¢XC
-
Humidity
: 0
to 90% non-condensing
-
Dimensions
: 180 mm x 105 mm
Specification
Isolation Input
-
Type : Isolated current input
-
Isolation Voltage : 3750V( Using External Power);
3000V ( Using internal Power)
-
Input voltage : 3.5V to 30V
-
Input impedance : 3K (DC 24V, 7.67mA) for each
channel
-
Response time: 10Khz Max
Isolation Output
-
Type : Isolated open collector : 100mA per
channel
-
External voltage : 30V (Max.)
-
Response time: 10Khz Max
-
Power requirements : +5V, 600mA (typical)
¡@
Applications
-
Factory Automation
-
Product Test
-
Laboratory Automation
¡@
Software
-
Toolkit
for DOS
-
Toolkit
for Windows 95/98
-
Toolkit
for Windows NT
-
Toolkit
for Windows 2000/XP
-
Toolkit
for LabVIEW 95/98
-
Toolkit
for LabVIEW NT
-
Toolkit
for LabVIEW 2000/XP
-
Toolkit
for OCX 95/98
-
Toolkit
for OCX NT
-
Toolkit
for OCX 2000/XP
-
Driver
for LINUX
-
Driver
for JAVA
-
Driver
for DasyLab
|
