Functional Description　

The PISO-C64 has 64-channel of optically isolated  digital outputs, arranged into two isolated banks.  Each digital output offers a darlington transistor and integral suppression diode for inductive load. Isolated output channels are designed into group C and Group D. The power supply of the input port may use the external power or the power from the PC side using DC/DC converter. The power supply of the output port should use the external power. This interface board is easily installed in any PC/AT/XT. The board interface to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The ISO-C64 has one 37-pin D-Sub Connector and one 40-pin male header. The 40-pin to DB-37 flat cable is used to fix with the case. The user can connect the digital signal through the second  D-Sub connector . Each D-Sub connector contains 32 output channels. 

Features

• 64-channel optically isolated digital output /open collector 

• Four isolated bank. 

• 3750V DC isolation voltage

General Environmental

• Operating temp  0-50°C

• Storage temp : -20°C  to  70°C

• Humidity : 0 to 90%  non-condensing

• Dimensions 

• 180 mm x 105 mm

Specifications

Isolation Output 

• Type : Isolated open collector : 100mA per channel(NPN)

• External voltage : 30V (Max.) Response time: 1Khz Typical

• Power requirements : +5V 800mA (typical)

Applications 

• Factory Automation

• Product Test

• Laboratory Automation

 Software

• Toolkit for DOS

• Toolkit for Windows 95/98

• Toolkit for Windows NT

• Toolkit for Windows 2000/XP

• Toolkit for LabVIEW 95/98

• Toolkit for LabVIEW NT

• Toolkit for LabVIEW 2000/XP

• Toolkit for OCX 95/98

• Toolkit for OCX NT

• Toolkit for OCX 2000/XP

• Driver for LINUX

• Driver for JAVA

• Driver for DasyLab