|
¡@
Functional
Description¡@
The PIO-D48
provides 48 TTL digital I/O lines. The PIO-D48 consists
of six 8-bit bi-direction ports. The 8-bit port are named
port A (PA), port B (PB),port C (PC) and the port C can be split into 2 nibble-wide(4-bit) ports. All port is
configured as inputs upon power-up or reset. The PIO-D48
has one D-Sub connector and one 50-pin flat cable
connectors, Each header can connect to a 50-pin flat
cable. The flat cable can be connected to ADP-37/PCI or
ADP-50/PCI adapter. The adapter can be fixed on the
chassis. Refer to the above figure. It can be installed
in a 5 V PCI bus and can support truly "Plug &
Play".
Features
-
PCI Bus
-
Up to 48 channels of digital I/O
-
All I/O lines buffered on the board
-
Eight-bit groups independently selectable for I/O
on each 24-bit port
-
Input/Output programmable I/O ports under
software control
-
SMD, short card
-
Connects directly to DB-24P, DB-24R, DB-24PR, DB-24PD,
DB-24RD, DB-24PRD, DB-16P8R, DB-24POR,
DB-24SSR, DB-24C or any OPTO-22 compatible
daughter boards
-
One 32-bit programmable internal timer
-
One 16-bit event counter
-
Interrupt source: 4-channel
-
Pull-up or pull-down resistors on I/O lines
-
Emulate two industrial-standard 8255 mode 0
-
Buffer output for higher driving capability
-
One D-Sub connector, one 50-pin flat cable
connector
-
Automatically detected by Windows 95/98/NT
-
No base address or IRQ switches to set
|
Environmental
-
Operating Temp. : 0 to 60
deg /C
-
Storage Temp. : -20 to 80
deg /C
-
Humidity: 0 to 90 % non-condensing
-
Dimensions : 156mm x 105mm
Software
-
Toolkit for DOS
-
Toolkit for Windows
95/98
-
Toolkit for Windows NT
-
Toolkit for Windows 2000/XP
-
Toolkit for LabVIEW
95/98
-
Toolkit for LabVIEW
NT
-
Toolkit for LabVIEW
2000/XP
-
Toolkit for OCX 95/98
-
Toolkit for
OCX NT
-
Toolkit for
OCX 2000/XP
-
Driver
for LINUX
-
Driver
for JAVA
-
Driver
for DasyLab
Specifications
-
All inputs are TTL
compatible
-
Logic high voltage: 2.4V (
Min. )
-
Logic low voltage: 0.8V (
Max. )
-
All outputs are TTL
compatible
-
Sink current: 64 mA ( Max.
)
-
Source current: 32 mA ( Max.
)
-
Power consumption: +5V @
900mA
¡@
¡@
¡@
¡@
|
