I-8KE8-MTCP-G

Introduction

I-8KE4-MTCP-G and I-8KE8-MTCP-G are Modbus/TCP I/O units with Modbus communication protocol. They support most of 8K and 87K series I/O modules, such as DI, DO, DIO, AI, AO, etc.. Most SCADA software support Modbus communication protocol, thus users can easily and quickly integrate remote I/Os to the SCADA software as data acquisition and monitor to apply to environment monitoring, power management, factory automation, etc.

Features

• Supports IPv4

• Supports Modbus/TCP communication protocol at Ethernet port.

• Supports Modbus/RTU communication protocol at RS-232 port.

• Supports 8K and 87K series DI/DO/AI/AO/Counter/Frequency modules

• I/O configurable via the Ethernet (Using the Modbus Utility)

• I/O scan engine
  The engine can automatically scan I/O modules plug in slots and range I/O registers address to continuous to have high-data-density registers to get best communication efficiency.

• Detection of I/O module communication status (online/offline).

• The SMMI of the panel can be used to 

          1.Configure the network setting (IP, Mask, Gateway)  

             2.Set the offset value of AI/AO module

• Allowed a maximum of 8 host PCs access simultaneously

• Firmware updateable (via the RS-232 port)

• Firmware programmable
  We provide the Modbus SDK allowing users customized the Modbus firmware. 

Modbus Utility:

The Modbus Utility package is for Windows 98/SE/2K/XP. It includes

1.Modbus Utility

• On-line configuration via Ethernet

• On-line help

• Automatically generate register mapping tables

• Configuration export/import 

2.MBRTU

Modbus/RTU client (with source code in VB6) to diagnostic Modbus/RTU slave devices.

3.MBTCP

Modbus/TCP client (with source code in VB6) to diagnostic Modbus/TCP slave devices.

Specifications

• CPU: 80186-80 or compatible (16 bits and 80MHz)

• SRAM: 512K bytes

• Flash ROM: 512K bytes

• EEPROM: 2K bytes

• Build-in Watchdog Timer

• Real time clock

• Ethernet port: 10BaseT NE2000 compatible

• COM0: internal use (to communicate with 87K modules on slots)

• COM1: RS-232 (to update firmware)

• SMMI (small man machine interface)
      5 digits number LED display
      4 LED indicators
      4 push buttons 

• I/O expansion slots:
      4 slots for I-8KE4-MTCP-G
      8 slots for I-8KE8-MTCP-G

• Frame ground (FG)
      Safety grounded
      Surge protection

• Power supply: 20W

• Power requirement: 10 ~ 30 VDC

• Power consumption:
      3.9 W (for I-8KE4-MTCP-G)
      5.1 W (for I-8KE8-MTCP-G)

Dimension

• 230 x 110 x 75.5 mm (for I-8KE4-MTCP-G)

• 354 x 110 x 75.5 mm (forI- 8KE8-MTCP-G)

Operating Environment

• Operating Temp.: –25°C to +75°C.

• Storage Temp.: –30°C to +85°C

• Humidity: 5 ~ 95%,non-condensing

Ordering Information

Optional Accessories 

 back