ICP DAS eNews If you have problems when reading this email or submitting the form, please click here.
Issue date: 2015/10/05

New products

New Product Release: PCI-P16POR16U
Universal PCI, 16–channel Isolated Digital Input and 16-channel PhotoMOS Relay Output Boards


The PCI-P16POR16U card is a new generation product that ICP DAS provides to meet RoHS compliance requirement and is designed as completely compatible with the PCI-P16POR16. Users can replace the PCI-P16POR16 by the PCI-P16POR16U directly without software/driver modification. The PCI-P16POR16U universal PCI card supports 3.3 V/5 V PCI bus and provide 16 photocoupler Digital Inputs that provide 5000 Vrms isolation protection and allows input signals to be completely floated to prevent ground loops noise.......more


New Product Release: PCIe-8620
PCI Express, 200 kS/s High-speed, 16-bit 8-ch Simultaneously Sampled Analog Input Board with 4-ch Isolated DI/O


The PCIe-8620 is a bus-type, isolated high-speed Analog Input board with isolated DI/O. The simultaneously sampled AD offers a mix of up to 8 single-ended 16-bit Analog Input channels with a 2 k Sample hardware FIFO. All channels feature a programmable input range of ±10 V or ±5 V with a sampling rate up to 200 kS/s per channel. The PCIe-8620 provides 4 isolated Digital Input channels and 4 isolated Digital Output channels. The isolation range of the board has been increased to 2500 VDC, making it one of the most cost-effective solutions if isolated AD with DI/O boards is a main concern......more


New Product Release: PCIe-8622
PCI Express, 200 kS/s High-speed, 16-bit 16-ch Simultaneously Sampled Analog Input Board with 12-ch Isolated DI/O


The PCIe-8622 is a bus-type, isolated high-speed AD multifunction board with 16-bit DA and isolated DI/O. The simultaneously sampled AD offers a mix of up to 16 single-ended, 16-bit Analog Input channels with a 2 k Sample hardware FIFO and 2500 VDC bus-typed isolation protection. All channels feature a programmable input range of ±10 V or ±5 V with a sampling rate up to 200 kS/s per channel......more


New Product: ZT-2530M, ZigBee Bridge Module

ZT-2530M is a ZigBee Bridge used to connect two different ZigBee networks. The absorption of wireless signals by buildings and other obstacles in the urban environments usually significantly impair wireless transmission. Therefore, ICP DAS provides the new ZT-2530M - the ZigBee bridge, which is equipped with dual antennas and combines a ZigBee coordinator with a ZigBee router. It is full hardware configuration, and can be used to bridge the communication between indoor and outdoor units or divide complex network in to groups to enhance efficiency......more

New release

End of Life Notification for PCI-P16POR16

CP DAS hereby formally gives End Of Life (EOL) notification that the PCI-P16POR16 will be phased out of production. The suggested replacement device is PCI-P16POR16U......more

Applications

PAC TECH Vol. E30_ 2015 is Now Available to Download
HMI and Device Control on a Large Screen using a Small PAC
The PAC TECH Vol. E30_ 2015 introduces various ICP DAS products used in Building/Home Automation applications, WISE/PMC applications and more. The content includes the following applications..... (more...)


HMI and Device Control on a Large Screen using a Small PAC
FCU (Fan-Coil Unit) Control System Solutions
Unlike the commercially available thermostat that requires installation of network concentrator when integrating with the Building Management System; the TPD series can be integrated with the Building Management System directly via Modbus TCP protocol by Ethernet; therefore lower the complexity of system implementation and reduce the future maintenance/operation costs. (more...)


HMI and Device Control on a Large Screen using a Small PAC
Application for Generator Management System in Taipei 101 Building
The generator management system provides full range of control and management of the generators; the SCADA system with user-friendly interface is designed for easy operations. The system architecture adopted coherent communication, therefore when new features is added in the future, as long as the module or hardware uses the same communication, the new features can be seamlessly added without affecting the existing architecture. The distributed modules can function independently to acquire hardware status information, and can be replaced without shutting down the system. (more...)

Subscribe to be ICP DAS eNews member, you will get:

  • Updates on other new products and services
  • The latest editions of PACTECH newsletter
  • Free training services, on-line seminars and technical support

Subscribe Now

For further assistance or more information about our full range of products and services, please contact us at Service Center , or visit ICP DAS website: http://www.icpdas.com

If you prefer not to receive future ICP DAS eNews newsletter, please contact ICP DAS eNews administrator at Unsubscribe webpage.


©2008 ICP DAS Co., Ltd. All rights reserved.