ICP DAS eNews If you have problems when reading this email or submitting the form, please click here.
Issue date: 2013/04/09

New products

New Product: ET-7202, ET-7215, ET-7226, ET-7252, ET-7255 and ET-7260
ET-7200 Series Ethernet I/O Modules


The ET-7200 series is the latest in advanced Ethernet I/O modules designed to replace and upgrade the ET-7000 series of modules, and includes Analog Input/Output, Digital Input/Output, Power Relay and RTD modules. The ET-7200 series provides full networking capabilities and a variety of I/O functions, together with web-based Ethernet I/O monitoring and control modules, and the modules can be remotely controlled using the Modbus TCP/UDP protocol via a 10/100 M Ethernet network. Modbus has become the de facto standard protocol for industrial communication, and is now the most commonly available means of connecting industrial electronic devices. This ensures that the ET-7200 series provides perfect integration with HMI, SCADA, PLC and other industrial control software systems......more


New Product: GPS-721-MRTU
GPS Receiver With Modbus/DCON Protocol


The GPS-721-MRTU module ensures high sensitivity and low power consumption with an ultra small form factor, and also supports the NMEA 0183 GPS protocol. The embedded GPS module can provide superior performance, even in an urban environment, or an environment that features dense foliage. In addition to the ability to acquire GPS data, the GPS-721-MRTU includes a single Digital Output channel and a single PPS (pulse per second) channel that can be used for precise timekeeping and time measurement. PPS functionality can be combined with an additional external time source in order to synchronize signal operations, and also provides the full date and time for accurate and precise applications......more

Applications

Water Refilling Station Automatic System
Energy Storage System
This system can improve the usage efficiency of the electrical power. During the off-peak time of the electricity use, the unused electricity can be stored in the battery. When the peak time is coming, these batteries supply the power to the electric grid. The customer utilizes one of the I-8120Ws in VP-25W1 to monitor the battery status, and another is used to feedback these data to the XP-8341. The XP-8341 transmits the status to the PC via Ethernet and control the charge time by the breaker. (more...)


The Cost Effective Automation System
Petrochemical GAS Pressure Detection System
The conveying pipes are everywhere in the petrochemical plants, and used for conveying the variety liquids and gases which may be poison and flammable. The situations of these liquids and gas must be presented and handled in the control center. The customer uses the WP-8841 with the touch screen to be the HMI and control system. On the WP-8441, there is an I-8064W and an I-87H17W. The I-87H17W is a HART AI module, and is applied for received the 8 ABB pressure transmitters which monitors the gas pressure through the pipes. This control system not only displays the gas pressure on the touch screen directly, but triggers the alarm while the gas pressure exceed the upper limitation.(more...)

Subscribe to be ICP DAS eNews member, you will get:

  • Updates on other new products and services
  • The latest editions of PACTECH newsletter
  • Free training services, on-line seminars and technical support

Subscribe Now

For further assistance or more information about our full range of products and services, please contact us at Service Center , or visit ICP DAS website: http://www.icpdas.com

If you prefer not to receive future ICP DAS eNews newsletter, please contact ICP DAS eNews administrator at Unsubscribe webpage.


©2008 ICP DAS Co., Ltd. All rights reserved.